Gates 90052120 D120 Hi-Power II BeltsOuter Length:125" Inner Length:120" Top Width: 1 1/4" Depth: 3/4" Material ID: 90052120 The
- Write a review
$113.19
Angle38Belt Back SideSmoothBelt InsideSmoothCoggedNoColorBlackCord MaterialPolyesterDepth3/4 inDepth (per rib)3/4 inEffective Length (in)120MaterialEPDMMax Temp (°F)140Min Temp (°F)-22Minimum Pulley Diameter12.732 inNumber ribs1Outside circumference (in)125outside length125 inReinforced MaterialFlex-Bonded PolyesterSectionDSeries9005SidedSingle SidedStatic ConductiveYesThickness (in)0.75Top width1 1/4 inTop Width (in)1.25Top width (per rib)1 1/4 inTypeBanded Heavy Duty
Specifications
| Ambient temperature (°C) | 40 |
| Belt section | D |
| Belt series | Gripbelt |
| CE | N |
| Construction type | Classic |
| Country of origin | Mexico |
| CSA | Y |
| Current | 0.70 A |
| Drive end bearing | Sleeve |
| Duty | Air over |
| Efficiency (%) | 0.95 |
| Electrical type | Shaded pole |
| Enclosure | Open air over |
| FASCO | 7163-1516 |
| Frame | 3.3 |
| Frame length | 1.95 in |
| Frame Material | Steel |
| Frame material | Steel |
| Frequency | 60 Hz |
| Height | 0.75 |
| HTC | 4010.39.1000 |
| Insulation class | B |
| Material | Neoprene |
| Mounting | Extended studs |
| Number of speeds | 1 |
| Operating temperature [max] ºC (°C) | 60 |
| Operating temperature [max] ºF (°F) | 140 |
| Opp drive end bearing | Sleeve |
| Output HP | 1/70 HP |
| Output KW | 0.01 kW |
| Outside diameter (in) | 125.2 in |
| Outside length/diameter (in) | 125.2 in |
| Overall Length | 4.78 in |
| Packaged height | 3.38 in |
| Packaged length | 8 in |
| Packaged width | 3.38 in |
| Phase | 1 |
| Pitch length | 123.3 |
| Poles | 4 |
| Product type | Wrapped belt |
| Rotation | Clockwise shaft end |
| RPM | 1500 |
| Section size | D |
| Service factor | 1 |
| Shaft diameter | 0.250 in |
| Shaft Diameter | 0.250 in |
| Shaft extension | 2.30 in |
| Shaft type | Flat |
| Speed | 1500 RPM |
| Starting method | Across the line |
| Thermal protection | Thermally protected |
| Type | Super gripbelt v-belts |
| UL | Recognized |
| Voltage | 115 V |
| Width (in) | 1.25 in |
D120