TBWOODS 14MPC50S90 14MPC-50S-90-3525 QT Power Chain II Sprocket
- Write a review
$1,006.52
Belt width90 mmBore typeTaper locking bushingBushing3525Bushing bore range1 3/16 - 3 15/16Dimension2.5Face width4.2Flanges2Groove profile14MHub length2.5Hub location1.7I.D.7.25Inertia WR2 (lbs ft2)2.63Inertia WR²230Inside hub projection0Material typeDuctile IronNumber of grooves50Number of hubs0Number of teeth50O.D.8.66O.D. (in)8.662Outside hub projection0Pitch14Pitch diameter8.77Rim face4.2RPM upper limit4410Tooth pitch14TypeA1F
Specifications
| Belt width | 90 mm |
| Bore type | Taper locking bushing |
| Bushing | 3525 |
| Bushing bore range | 1 3/16 - 3 15/16 |
| Dimension | 2.5 |
| Face width | 4.2 |
| Flanges | 2 |
| Groove profile | 14M |
| Hub length | 2.5 |
| Hub location | 1.7 |
| I.D. | 7.25 |
| Inertia WR2 (lbs ft2) | 2.63 |
| Inertia WR² | 230 |
| Inside hub projection | 0 |
| Material type | Ductile Iron |
| Number of grooves | 50 |
| Number of hubs | 0 |
| Number of teeth | 50 |
| O.D. | 8.66 |
| O.D. (in) | 8.662 |
| Outside hub projection | 0 |
| Pitch | 14 |
| Pitch diameter | 8.77 |
| Rim face | 4.2 |
| RPM upper limit | 4410 |
| Tooth pitch | 14 |
| Type | A1F |
14MPC50S90