Jason Industrial 465H-100, Heavy 1/2-(in) (H) Pitch Standard Timing Belt
- Write a review
$38.24
Oil heat and abrasion-resistant. Stock timing belts are listed below. They have fiberglass tension members neoprene body with nylon covered teeth all bonded together for maximum strengthMini-pitch MXL (0.080-inch pitch) timing belts are also available. Jason timing belts are specified by belt length in inches times 10 belt pitch code and a three-digit belt width code which is the decimal inch-width multiplied by 100. Any width available from stock consult Jason for pricing.
Specifications
| Belt Back Side | Smooth |
| Belt Height (in) | 0.16 |
| Color | Black |
| End | Endless |
| Fabric Material | Nylon Teeth |
| Height (in) | 0.09 |
| Length (in) | 46.5 |
| Material | Neoprene |
| Minimum Pulley Diameter | 3.13 in |
| Number of Teeth | 93 |
| Pitch (in) | 0.5 |
| Pitch length (in) | 46.5 |
| Reinforced Material | Fiberglass |
| Section | H |
| Series | 9257 |
| Sided | Single Sided |
| Sprocket Comptab | PowerGrip GT |
| Standard Width | YES |
| Static Conductive | No |
| Temperature Range | -30 to 180 deg F |
| Tooth Profile | Trapezoidal Design |
| Type | Heavy |
| Width (in) | 1 |
465H100