Morse 133Q56L15 XB1064 15:1 Ratio 1.33" Center Distance 0.625" Input Bore (C Face) 0.625" Input Diameter C-Face Quill Input 0.62
- Write a review
$744.46
AssemblyQ-LCenter Distance Range1" thru 3.25"Centre Distance1.33 inEfficiency80Frame Size56CGear Ratio15:1Gear TypeWormH-Tap size5/16 - 18HP1HP Range1/2 to 3/4 HP (< 1)Input Bore (C Face)0.625Input HP @ 1750 RPM0.56Input Keyway (C Face)3/16 X 3/32Input Maximum Speed1750 rpmInput Size5/8 in DiaInput TypeC-Face QuilledKeyway Size1/8 x 1 in InputLength6.07 inLubrication TypePolyglycol OilMaterialCast IronModel133QMounting TypeDirect/FloorNo. of Gear ReductionsSingleOutput Diameter (in)0.625Output Key3/16 X 1.31Output Maximum Speed116.6 rpmOutput RPM116.6Output Shaft Assembly CodeLOutput Shaft DirectionLeftOutput Size0.625 in Dia x 2.16 in LOutput Torque Range250 to 500 in lbsOutput Torque Rating (in-lb)292 in-lbs @1750 input RPMOutput TypeLeft HandOverhung Load Rating (Output Shaft(lb))458Product TypeWorm Speed ReducerReducerWorm - Right AngleReducer StyleStandardSeries CodeRaiderService Factor1Shaft Seal MaterialNitrileTAP Depth0.5Thrust Rating - output shaft1156Torque Rating23.12 in-lb Input/116.6 in-lb OutputTypeSingle Reduction WashdownWidth5.84 in
Specifications
| Assembly | Q-L |
| Center Distance Range | 1" thru 3.25" |
| Centre Distance | 1.33 in |
| Efficiency | 80 |
| Frame Size | 56C |
| Gear Ratio | 15:1 |
| Gear Type | Worm |
| H-Tap size | 5/16 - 18 |
| HP | 1 |
| HP Range | 1/2 to 3/4 HP (< 1) |
| Input Bore (C Face) | 0.625 |
| Input HP @ 1750 RPM | 0.56 |
| Input Keyway (C Face) | 3/16 X 3/32 |
| Input Maximum Speed | 1750 rpm |
| Input Size | 5/8 in Dia |
| Input Type | C-Face Quilled |
| Keyway Size | 1/8 x 1 in Input |
| Length | 6.07 in |
| Lubrication Type | Polyglycol Oil |
| Material | Cast Iron |
| Model | 133Q |
| Mounting Type | Direct/Floor |
| No. of Gear Reductions | Single |
| Output Diameter (in) | 0.625 |
| Output Key | 3/16 X 1.31 |
| Output Maximum Speed | 116.6 rpm |
| Output RPM | 116.6 |
| Output Shaft Assembly Code | L |
| Output Shaft Direction | Left |
| Output Size | 0.625 in Dia x 2.16 in L |
| Output Torque Range | 250 to 500 in lbs |
| Output Torque Rating (in-lb) | 292 in-lbs @1750 input RPM |
| Output Type | Left Hand |
| Overhung Load Rating (Output Shaft(lb)) | 458 |
| Product Type | Worm Speed Reducer |
| Reducer | Worm - Right Angle |
| Reducer Style | Standard |
| Series Code | Raider |
| Service Factor | 1 |
| Shaft Seal Material | Nitrile |
| TAP Depth | 0.5 |
| Thrust Rating - output shaft | 1156 |
| Torque Rating | 23.12 in-lb Input/116.6 in-lb Output |
| Type | Single Reduction Washdown |
| Width | 5.84 in |
XB1064