Grove Gear EL-BMQ842-25-D-56 25:1 Ratio, 0.625" Input Diameter, 1.75" Output Diameter, Right Angle Aluminum Single-Reduction Wor
- Write a review
$3,882.40
AssemblyBMQ-DCenter Distance4.2 In.Center distance (in)4.25Center Distance RangeAbove 3.25"Gear Drive ReductionsSingleGear TypeWormH-Tap Size5/8-11Housing materialAluminumHP Range7-1/2 (< 10)Input Bore (C Face)0.625Input Diameter (in)0.625Input Flange56CInput HP7.94Input HP @ 1750 RPM7.94Input Keyway (C Face)3/16 x 3/32Input RPM1750Input StyleQuillMax OHL (Output Shaft)3445Max Thrust Load (Output Shaft)2533Model CodeBMQ842Motor Frame Size56Mounting StyleBaseNo. of Gear ReductionsSingleOutputLeft & RightOutput Diameter (in)1.750Output HP6.946Output Key3/8 x 3.00Output RPM70Output Shaft Assembly CodeDOutput Shaft DirectionDoubleOutput Shaft OrientationLROutput StyleDOutput Torque6254Output Torque Range5000 to 10000 in lbsOutput typeSolid ShaftOverhung Load3445Paint/CoatingAluminumProduct LineEL Series - Aluminum Worm Gear ReducersProduct TypeRight AngleRatio25 to 1Ratio Range25-1ReducerWorm - Right AngleReducer StyleWorm - Right AngleReducer TypeSingleSeriesEL Series - Aluminum Worm Gear ReducersSeries CodeELSeries StyleEL-BMQ-DService Factor1Shaft Seal MaterialVitonSize56CTAP Depth1.19Thrust Rating - output shaft2533
Specifications
| Assembly | BMQ-D |
| Center Distance | 4.2 In. |
| Center distance (in) | 4.25 |
| Center Distance Range | Above 3.25" |
| Gear Drive Reductions | Single |
| Gear Type | Worm |
| H-Tap Size | 5/8-11 |
| Housing material | Aluminum |
| HP Range | 7-1/2 (< 10) |
| Input Bore (C Face) | 0.625 |
| Input Diameter (in) | 0.625 |
| Input Flange | 56C |
| Input HP | 7.94 |
| Input HP @ 1750 RPM | 7.94 |
| Input Keyway (C Face) | 3/16 x 3/32 |
| Input RPM | 1750 |
| Input Style | Quill |
| Max OHL (Output Shaft) | 3445 |
| Max Thrust Load (Output Shaft) | 2533 |
| Model Code | BMQ842 |
| Motor Frame Size | 56 |
| Mounting Style | Base |
| No. of Gear Reductions | Single |
| Output | Left & Right |
| Output Diameter (in) | 1.750 |
| Output HP | 6.946 |
| Output Key | 3/8 x 3.00 |
| Output RPM | 70 |
| Output Shaft Assembly Code | D |
| Output Shaft Direction | Double |
| Output Shaft Orientation | LR |
| Output Style | D |
| Output Torque | 6254 |
| Output Torque Range | 5000 to 10000 in lbs |
| Output type | Solid Shaft |
| Overhung Load | 3445 |
| Paint/Coating | Aluminum |
| Product Line | EL Series - Aluminum Worm Gear Reducers |
| Product Type | Right Angle |
| Ratio | 25 to 1 |
| Ratio Range | 25-1 |
| Reducer | Worm - Right Angle |
| Reducer Style | Worm - Right Angle |
| Reducer Type | Single |
| Series | EL Series - Aluminum Worm Gear Reducers |
| Series Code | EL |
| Series Style | EL-BMQ-D |
| Service Factor | 1 |
| Shaft Seal Material | Viton |
| Size | 56C |
| TAP Depth | 1.19 |
| Thrust Rating - output shaft | 2533 |
EL8420246.00