Grove Gear EL-B818-25-D 25:1 Ratio, 0.625" Input Diameter, 0.75" Output Diameter, Right Angle Aluminum Single-Reduction Worm Red
- Write a review
$1,015.00
AssemblyB-DCenter Distance1.8 In.Center distance (in)1.75Center Distance Range1" thru 3.25"Gear Drive ReductionsSingleGear TypeWormH-Tap Size5/16-18Housing materialAluminumHP Range1/2 to 3/4 HP (< 1)Input Diameter (in)0.625Input HP0.884Input HP @ 1750 RPM0.884Input RPM1750Input StyleSolid Input ShaftMax OHL (Output Shaft)920Max Thrust Load (Output Shaft)1144Model CodeB818Mounting StyleBaseNo. of Gear ReductionsSingleOutputLeft & RightOutput Diameter (in)0.750Output HP0.715Output Key3/16 x 1.38Output RPM70Output ShaftSolid ShaftOutput Shaft Assembly CodeDOutput Shaft DirectionDoubleOutput Shaft OrientationLROutput StyleDOutput Torque644Output Torque Range500 to 1000 in lbsOutput typeSolid ShaftOverhung Load1200Paint/CoatingAluminumProduct LineEL Series - Aluminum Worm Gear ReducersProduct TypeRight AngleRatio25 to 1Ratio Range25-1ReducerWorm - Right AngleReducer StyleWorm - Right AngleReducer TypeSingleSeriesEL Series - Aluminum Worm Gear ReducersSeries CodeELSeries StyleEL-B-DService Factor1Shaft Seal MaterialVitonTAP Depth0.63Thrust Rating - output shaft1144
Specifications
| Assembly | B-D |
| Center Distance | 1.8 In. |
| Center distance (in) | 1.75 |
| Center Distance Range | 1" thru 3.25" |
| Gear Drive Reductions | Single |
| Gear Type | Worm |
| H-Tap Size | 5/16-18 |
| Housing material | Aluminum |
| HP Range | 1/2 to 3/4 HP (< 1) |
| Input Diameter (in) | 0.625 |
| Input HP | 0.884 |
| Input HP @ 1750 RPM | 0.884 |
| Input RPM | 1750 |
| Input Style | Solid Input Shaft |
| Max OHL (Output Shaft) | 920 |
| Max Thrust Load (Output Shaft) | 1144 |
| Model Code | B818 |
| Mounting Style | Base |
| No. of Gear Reductions | Single |
| Output | Left & Right |
| Output Diameter (in) | 0.750 |
| Output HP | 0.715 |
| Output Key | 3/16 x 1.38 |
| Output RPM | 70 |
| Output Shaft | Solid Shaft |
| Output Shaft Assembly Code | D |
| Output Shaft Direction | Double |
| Output Shaft Orientation | LR |
| Output Style | D |
| Output Torque | 644 |
| Output Torque Range | 500 to 1000 in lbs |
| Output type | Solid Shaft |
| Overhung Load | 1200 |
| Paint/Coating | Aluminum |
| Product Line | EL Series - Aluminum Worm Gear Reducers |
| Product Type | Right Angle |
| Ratio | 25 to 1 |
| Ratio Range | 25-1 |
| Reducer | Worm - Right Angle |
| Reducer Style | Worm - Right Angle |
| Reducer Type | Single |
| Series | EL Series - Aluminum Worm Gear Reducers |
| Series Code | EL |
| Series Style | EL-B-D |
| Service Factor | 1 |
| Shaft Seal Material | Viton |
| TAP Depth | 0.63 |
| Thrust Rating - output shaft | 1144 |
EL8180030.00