Grove Gear EL-B830-60-D 60:1 Ratio, 0.875" Input Diameter, 1.5" Output Diameter, Right Angle Aluminum Single-Reduction Worm Redu
- Write a review
$2,003.35
AssemblyB-DCenter Distance3 In.Center distance (in)3.00Center Distance Range1" thru 3.25"Gear Drive ReductionsSingleGear TypeWormH-Tap Size1/2-13Housing materialAluminumHP Range1 to 1-1/2 (< 2)Input Diameter (in)0.875Input HP1.637Input HP @ 1750 RPM1.637Input RPM1750Input StyleSolid Input ShaftKeyway3/16 X 1.63Max OHL (Output Shaft)2170Max Thrust Load (Output Shaft)2574Model CodeB830Mounting StyleBaseNo. of Gear ReductionsSingleOutputLeft & RightOutput Diameter (in)1.500Output HP1.117Output Key3/8 x 2.25Output RPM29Output ShaftSolid ShaftOutput Shaft Assembly CodeDOutput Shaft DirectionDoubleOutput Shaft OrientationLROutput StyleDOutput Torque2413Output Torque Range1000 to 2500 in lbsOutput typeSolid ShaftOverhung Load2170Paint/CoatingAluminumProduct LineEL Series - Aluminum Worm Gear ReducersProduct TypeRight AngleRatio60 to 1Ratio Range60-1ReducerWorm - Right AngleReducer StyleWorm - Right AngleReducer TypeSingleSeriesEL Series - Aluminum Worm Gear ReducersSeries CodeELSeries StyleEL-B-DService Factor1Shaft Seal MaterialVitonTAP Depth1Thrust Rating - output shaft2574
Specifications
| Assembly | B-D |
| Center Distance | 3 In. |
| Center distance (in) | 3.00 |
| Center Distance Range | 1" thru 3.25" |
| Gear Drive Reductions | Single |
| Gear Type | Worm |
| H-Tap Size | 1/2-13 |
| Housing material | Aluminum |
| HP Range | 1 to 1-1/2 (< 2) |
| Input Diameter (in) | 0.875 |
| Input HP | 1.637 |
| Input HP @ 1750 RPM | 1.637 |
| Input RPM | 1750 |
| Input Style | Solid Input Shaft |
| Keyway | 3/16 X 1.63 |
| Max OHL (Output Shaft) | 2170 |
| Max Thrust Load (Output Shaft) | 2574 |
| Model Code | B830 |
| Mounting Style | Base |
| No. of Gear Reductions | Single |
| Output | Left & Right |
| Output Diameter (in) | 1.500 |
| Output HP | 1.117 |
| Output Key | 3/8 x 2.25 |
| Output RPM | 29 |
| Output Shaft | Solid Shaft |
| Output Shaft Assembly Code | D |
| Output Shaft Direction | Double |
| Output Shaft Orientation | LR |
| Output Style | D |
| Output Torque | 2413 |
| Output Torque Range | 1000 to 2500 in lbs |
| Output type | Solid Shaft |
| Overhung Load | 2170 |
| Paint/Coating | Aluminum |
| Product Line | EL Series - Aluminum Worm Gear Reducers |
| Product Type | Right Angle |
| Ratio | 60 to 1 |
| Ratio Range | 60-1 |
| Reducer | Worm - Right Angle |
| Reducer Style | Worm - Right Angle |
| Reducer Type | Single |
| Series | EL Series - Aluminum Worm Gear Reducers |
| Series Code | EL |
| Series Style | EL-B-D |
| Service Factor | 1 |
| Shaft Seal Material | Viton |
| TAP Depth | 1 |
| Thrust Rating - output shaft | 2574 |
EL8300034.00