Grove Gear GR-BM818-7.5-D-140 7.5:1 Ratio, 0.625" Input Diameter, 0.875" Output Diameter, Right Angle Cast Iron Single-Reduction
- Write a review
$836.52
AssemblyBM-DCenter Distance1.8 In.Center distance (in)1.75Center Distance Range1" thru 3.25"Gear Drive ReductionsSingleGear TypeWormH-Tap Size5/16-18 UNCHousing materialCast ironHP Range1 to 1-1/2 (< 2)Input Bore (C Face)0.875Input Diameter (in)0.625Input Flange143-5TCInput HP1.909Input HP @ 1750 RPM1.909Input Keyway (C Face)3/16 x 3/32Input RPM1750Input Style3-Piece CoupledMax OHL (Output Shaft)1200Max Thrust Load (Output Shaft)868Model CodeBM818Motor Frame Size140Mounting StyleBaseNo. of Gear ReductionsSingleOutputLeft & RightOutput Diameter (in)0.875Output HP1.745Output Key3/16 x 1.38Output RPM233Output Shaft Assembly CodeDOutput Shaft DirectionDoubleOutput Shaft OrientationLROutput StyleDOutput Torque471Output Torque (lb-in)471Output Torque Range250 to 500 in lbsOutput typeSolid ShaftOverhung Load1200Paint/CoatingBlueProduct LineGR Series - Ironman Worm Gear ReducersProduct TypeRight AngleRatio7.5 to 1Ratio Range7.5-1ReducerWorm - Right AngleReducer StyleWorm - Right AngleReducer TypeSingleSeriesGR Series - Ironman Worm Gear ReducersSeries CodeGRSeries StyleGR-BM-DService Factor1Shaft Seal MaterialVitonSize140TCTAP Depth0.63Thrust Rating - output shaft868
Specifications
| Assembly | BM-D |
| Center Distance | 1.8 In. |
| Center distance (in) | 1.75 |
| Center Distance Range | 1" thru 3.25" |
| Gear Drive Reductions | Single |
| Gear Type | Worm |
| H-Tap Size | 5/16-18 UNC |
| Housing material | Cast iron |
| HP Range | 1 to 1-1/2 (< 2) |
| Input Bore (C Face) | 0.875 |
| Input Diameter (in) | 0.625 |
| Input Flange | 143-5TC |
| Input HP | 1.909 |
| Input HP @ 1750 RPM | 1.909 |
| Input Keyway (C Face) | 3/16 x 3/32 |
| Input RPM | 1750 |
| Input Style | 3-Piece Coupled |
| Max OHL (Output Shaft) | 1200 |
| Max Thrust Load (Output Shaft) | 868 |
| Model Code | BM818 |
| Motor Frame Size | 140 |
| Mounting Style | Base |
| No. of Gear Reductions | Single |
| Output | Left & Right |
| Output Diameter (in) | 0.875 |
| Output HP | 1.745 |
| Output Key | 3/16 x 1.38 |
| Output RPM | 233 |
| Output Shaft Assembly Code | D |
| Output Shaft Direction | Double |
| Output Shaft Orientation | LR |
| Output Style | D |
| Output Torque | 471 |
| Output Torque (lb-in) | 471 |
| Output Torque Range | 250 to 500 in lbs |
| Output type | Solid Shaft |
| Overhung Load | 1200 |
| Paint/Coating | Blue |
| Product Line | GR Series - Ironman Worm Gear Reducers |
| Product Type | Right Angle |
| Ratio | 7.5 to 1 |
| Ratio Range | 7.5-1 |
| Reducer | Worm - Right Angle |
| Reducer Style | Worm - Right Angle |
| Reducer Type | Single |
| Series | GR Series - Ironman Worm Gear Reducers |
| Series Code | GR |
| Series Style | GR-BM-D |
| Service Factor | 1 |
| Shaft Seal Material | Viton |
| Size | 140TC |
| TAP Depth | 0.63 |
| Thrust Rating - output shaft | 868 |
GR8180098.00