Morse 325Q56L50 XI1129 50:1 Ratio 3.25" Center Distance 0.625" Input Bore (C Face) 0.625" Input Diameter C-Face Quill Input 1.37
- Write a review
$2,738.04
AssemblyQ-LCenter Distance (in)3.25 3.25Center Distance Range1" thru 3.25"Efficiency80Frame Size56CGear Ratio50:1Gear TypeWormH-Tap size7/16 - 14Housing MaterialCast IronHP Range2HP (< 3)Input Bore (C Face)0.625Input Diameter (in)0.625Input HP @ 1750 RPM2.05Input Keyway (C Face)3/16 X 3/32Input RPM1750Input Speed1750Input StyleC-Face QuillModel325QMounting TypeNo BaseNo. of Gear ReductionsSingleOutput Diameter (in)1.375Output Key5/16 X 2.88Output RPM35Output Shaft Assembly CodeLOutput Shaft DirectionLeftOutput Torque Range2500 to 5000 in lbsOutput Torque Rating (in-lb)3315 in-lbs @1750 input RPMOutput TypeSolid ShaftOverhung Load Rating (Output Shaft(lb))2401Product TypeWorm Speed ReducerRatio Range50:1ReducerWorm - Right AngleReducer StyleStandardSeries CodeRaiderService Factor1Shaft Seal MaterialNitrileTAP Depth0.8Thrust Rating - output shaft3410
Specifications
| Assembly | Q-L |
| Center Distance (in) | 3.25 3.25 |
| Center Distance Range | 1" thru 3.25" |
| Efficiency | 80 |
| Frame Size | 56C |
| Gear Ratio | 50:1 |
| Gear Type | Worm |
| H-Tap size | 7/16 - 14 |
| Housing Material | Cast Iron |
| HP Range | 2HP (< 3) |
| Input Bore (C Face) | 0.625 |
| Input Diameter (in) | 0.625 |
| Input HP @ 1750 RPM | 2.05 |
| Input Keyway (C Face) | 3/16 X 3/32 |
| Input RPM | 1750 |
| Input Speed | 1750 |
| Input Style | C-Face Quill |
| Model | 325Q |
| Mounting Type | No Base |
| No. of Gear Reductions | Single |
| Output Diameter (in) | 1.375 |
| Output Key | 5/16 X 2.88 |
| Output RPM | 35 |
| Output Shaft Assembly Code | L |
| Output Shaft Direction | Left |
| Output Torque Range | 2500 to 5000 in lbs |
| Output Torque Rating (in-lb) | 3315 in-lbs @1750 input RPM |
| Output Type | Solid Shaft |
| Overhung Load Rating (Output Shaft(lb)) | 2401 |
| Product Type | Worm Speed Reducer |
| Ratio Range | 50:1 |
| Reducer | Worm - Right Angle |
| Reducer Style | Standard |
| Series Code | Raider |
| Service Factor | 1 |
| Shaft Seal Material | Nitrile |
| TAP Depth | 0.8 |
| Thrust Rating - output shaft | 3410 |
XI1129