Morse 133Q56LR40 XB1088 40:1 Ratio 1.33" Center Distance 0.625" Input Bore (C Face) 0.625" Input Diameter C-Face Quill Input 0.6
- Write a review
$709.01
AssemblyQ-LRCenter Distance Range1" thru 3.25"Centre Distance1.33 inEfficiency80 %Frame Size56CGear Ratio40:1Gear TypeWormH-Tap size5/16 - 18Height4.66 inHP1HP Range1/3 HP or Less (< 1/2)Input Bore (C Face)0.625Input HP @ 1750 RPM0.26Input Keyway (C Face)3/16 X 3/32Input Maximum Speed1750 rpmInput Size5/8 in DiaInput TypeC-Face QuilledKeyway Size1/8 x 1 in InputLength6.07 inLubrication TypePolyglycol OilMaterialCast IronModel133QMounting TypeDirect/FloorNo. of Gear ReductionsSingleOutput Diameter (in)0.625Output Key3/16 X 1.31Output Maximum Speed43.7 rpmOutput RPM43.7Output Shaft Assembly CodeDOutput Shaft DirectionDoubleOutput Shaft OrientationLROutput Size5/8 in Dia x 2.16 in LOutput Torque Range250 to 500 in lbsOutput Torque Rating (in-lb)322 in-lbs @1750 input RPMOutput TypeLeft and RightOverhung Load Rating (Output Shaft(lb))458Product TypeWorm Speed ReducerReducerWorm - Right AngleReducer StyleStandardSeries CodeRaiderService Factor1Shaft Seal MaterialNitrileTAP Depth0.5Thrust Rating - output shaft1399Torque Rating11.85 in-lb Input/43.7 in-lb OutputTypeSingle Reduction StandardWidth5.84 in
Specifications
| Assembly | Q-LR |
| Center Distance Range | 1" thru 3.25" |
| Centre Distance | 1.33 in |
| Efficiency | 80 % |
| Frame Size | 56C |
| Gear Ratio | 40:1 |
| Gear Type | Worm |
| H-Tap size | 5/16 - 18 |
| Height | 4.66 in |
| HP | 1 |
| HP Range | 1/3 HP or Less (< 1/2) |
| Input Bore (C Face) | 0.625 |
| Input HP @ 1750 RPM | 0.26 |
| Input Keyway (C Face) | 3/16 X 3/32 |
| Input Maximum Speed | 1750 rpm |
| Input Size | 5/8 in Dia |
| Input Type | C-Face Quilled |
| Keyway Size | 1/8 x 1 in Input |
| Length | 6.07 in |
| Lubrication Type | Polyglycol Oil |
| Material | Cast Iron |
| Model | 133Q |
| Mounting Type | Direct/Floor |
| No. of Gear Reductions | Single |
| Output Diameter (in) | 0.625 |
| Output Key | 3/16 X 1.31 |
| Output Maximum Speed | 43.7 rpm |
| Output RPM | 43.7 |
| Output Shaft Assembly Code | D |
| Output Shaft Direction | Double |
| Output Shaft Orientation | LR |
| Output Size | 5/8 in Dia x 2.16 in L |
| Output Torque Range | 250 to 500 in lbs |
| Output Torque Rating (in-lb) | 322 in-lbs @1750 input RPM |
| Output Type | Left and Right |
| Overhung Load Rating (Output Shaft(lb)) | 458 |
| Product Type | Worm Speed Reducer |
| Reducer | Worm - Right Angle |
| Reducer Style | Standard |
| Series Code | Raider |
| Service Factor | 1 |
| Shaft Seal Material | Nitrile |
| TAP Depth | 0.5 |
| Thrust Rating - output shaft | 1399 |
| Torque Rating | 11.85 in-lb Input/43.7 in-lb Output |
| Type | Single Reduction Standard |
| Width | 5.84 in |
XB1088