Morse 206Q56LR30 XE1117 30:1 Ratio 2.06" Center Distance 0.625" Input Bore (C Face) 0.625" Input Diameter C-Face Quill Input 1"
- Write a review
$955.87
AssemblyQ-LRCenter Distance (in)2.06 2.06Center Distance Range1" thru 3.25"Efficiency80Frame Size56CGear Ratio30:1Gear TypeWormH-Tap size3/8 - 16Height10.5Housing MaterialCast IronHP Range1 to 1-1/2 (< 2)Input Bore (C Face)0.625Input Diameter (in)0.625Input HP @ 1750 RPM0.94Input Keyway (C Face)3/16 X 3/32Input RPM1750Input Speed1750Input StyleC-Face QuillLength10.69Model206QMounting TypeNo BaseNo. of Gear ReductionsSingleOutput Diameter (in)1Output Key1/4 X 1.75Output RPM58.3Output Shaft Assembly CodeDOutput Shaft DirectionDoubleOutput Shaft OrientationLROutput Torque Range500 to 1000 in lbsOutput Torque Rating (in-lb)968 in-lbs @1750 input RPMOutput TypeSolid ShaftOverhung Load Rating (Output Shaft(lb))1078Product TypeWorm Speed ReducerRatio Range30:1ReducerWorm - Right AngleReducer StyleStandardSeries CodeRaiderService Factor1Shaft Seal MaterialNitrileTAP Depth0.61Thrust Rating - output shaft2300Width9.06
Specifications
| Assembly | Q-LR |
| Center Distance (in) | 2.06 2.06 |
| Center Distance Range | 1" thru 3.25" |
| Efficiency | 80 |
| Frame Size | 56C |
| Gear Ratio | 30:1 |
| Gear Type | Worm |
| H-Tap size | 3/8 - 16 |
| Height | 10.5 |
| Housing Material | Cast Iron |
| HP Range | 1 to 1-1/2 (< 2) |
| Input Bore (C Face) | 0.625 |
| Input Diameter (in) | 0.625 |
| Input HP @ 1750 RPM | 0.94 |
| Input Keyway (C Face) | 3/16 X 3/32 |
| Input RPM | 1750 |
| Input Speed | 1750 |
| Input Style | C-Face Quill |
| Length | 10.69 |
| Model | 206Q |
| Mounting Type | No Base |
| No. of Gear Reductions | Single |
| Output Diameter (in) | 1 |
| Output Key | 1/4 X 1.75 |
| Output RPM | 58.3 |
| Output Shaft Assembly Code | D |
| Output Shaft Direction | Double |
| Output Shaft Orientation | LR |
| Output Torque Range | 500 to 1000 in lbs |
| Output Torque Rating (in-lb) | 968 in-lbs @1750 input RPM |
| Output Type | Solid Shaft |
| Overhung Load Rating (Output Shaft(lb)) | 1078 |
| Product Type | Worm Speed Reducer |
| Ratio Range | 30:1 |
| Reducer | Worm - Right Angle |
| Reducer Style | Standard |
| Series Code | Raider |
| Service Factor | 1 |
| Shaft Seal Material | Nitrile |
| TAP Depth | 0.61 |
| Thrust Rating - output shaft | 2300 |
| Width | 9.06 |
XE1117