Grove Gear EL-B842-10-D 10:1 Ratio, 1.25" Input Diameter, 1.75" Output Diameter, Right Angle Aluminum Single-Reduction Worm Redu
- Write a review
$3,608.19
AssemblyB-DCenter Distance4.2 In.Center distance (in)4.25Center Distance RangeAbove 3.25"Gear Drive ReductionsSingleGear TypeWormH-Tap Size5/8-11Housing materialAluminumHP Range10 HP (< 15)Input Diameter (in)1.25Input HP14.93Input HP @ 1750 RPM14.93Input RPM1750Input StyleSolid Input ShaftKeyway1/4 X 2.50Max OHL (Output Shaft)3010Max Thrust Load (Output Shaft)1788Model CodeB842Mounting StyleBaseNo. of Gear ReductionsSingleOutputLeft & RightOutput Diameter (in)1.750Output HP14Output Key3/8 x 3.00Output RPM175Output Shaft Assembly CodeDOutput Shaft DirectionDoubleOutput Shaft OrientationLROutput StyleDOutput Torque5042Output Torque Range5000 to 10000 in lbsOutput typeSolid ShaftOverhung Load3010Paint/CoatingAluminumProduct LineEL Series - Aluminum Worm Gear ReducersProduct TypeRight AngleRatio10 to 1Ratio Range10-1ReducerWorm - Right AngleReducer StyleWorm - Right AngleReducer TypeSingleSeriesEL Series - Aluminum Worm Gear ReducersSeries CodeELSeries StyleEL-B-DService Factor1Shaft Seal MaterialVitonTAP Depth1.19Thrust Rating - output shaft1788
Specifications
| Assembly | B-D |
| Center Distance | 4.2 In. |
| Center distance (in) | 4.25 |
| Center Distance Range | Above 3.25" |
| Gear Drive Reductions | Single |
| Gear Type | Worm |
| H-Tap Size | 5/8-11 |
| Housing material | Aluminum |
| HP Range | 10 HP (< 15) |
| Input Diameter (in) | 1.25 |
| Input HP | 14.93 |
| Input HP @ 1750 RPM | 14.93 |
| Input RPM | 1750 |
| Input Style | Solid Input Shaft |
| Keyway | 1/4 X 2.50 |
| Max OHL (Output Shaft) | 3010 |
| Max Thrust Load (Output Shaft) | 1788 |
| Model Code | B842 |
| Mounting Style | Base |
| No. of Gear Reductions | Single |
| Output | Left & Right |
| Output Diameter (in) | 1.750 |
| Output HP | 14 |
| Output Key | 3/8 x 3.00 |
| Output RPM | 175 |
| Output Shaft Assembly Code | D |
| Output Shaft Direction | Double |
| Output Shaft Orientation | LR |
| Output Style | D |
| Output Torque | 5042 |
| Output Torque Range | 5000 to 10000 in lbs |
| Output type | Solid Shaft |
| Overhung Load | 3010 |
| Paint/Coating | Aluminum |
| Product Line | EL Series - Aluminum Worm Gear Reducers |
| Product Type | Right Angle |
| Ratio | 10 to 1 |
| Ratio Range | 10-1 |
| Reducer | Worm - Right Angle |
| Reducer Style | Worm - Right Angle |
| Reducer Type | Single |
| Series | EL Series - Aluminum Worm Gear Reducers |
| Series Code | EL |
| Series Style | EL-B-D |
| Service Factor | 1 |
| Shaft Seal Material | Viton |
| TAP Depth | 1.19 |
| Thrust Rating - output shaft | 1788 |
EL8420027.00