Grove Gear GR8520604.39 GR-HMQ852-40-H_-180-39
- Write a review
$5,661.34
AssemblyHMQ-H1Bore Code39Center Distance5.2 In.Center Distance RangeAbove 3.25"Gear TypeWormHousing materialCast IronHP Range7-1/2 HP to (< 10)HPInput Bore (C Face)1.125Input Flange182-4TCInput HP1.592Input Keyway (C Face)1/4 X 1/8Input RPM100Input StyleQuillModel CodeHMQ852Motor Frame Size180No. of Gear ReductionsSingleOutputHollowOutput Diameter (in)2.438Output HP0.903Output Key5/8 X 4.00Output RPM2.5Output Shaft DirectionH1Output Torque (lb-in)22772Output Torque Range5000 to 10000 in lbsOutput Torque Rating (in-lb)9419Overhung Load Rating (Output Shaft(lb))3560Paint/CoatingBlueProduct TypeRight AngleRatio40Ratio Range40:01:00ReducerWorm - Right AngleSeriesGR Series - Ironman Worm Gear ReducersSeries CodeGRService Factor1Shaft Seal MaterialVitonThrust Rating - output shaft3412
Specifications
| Assembly | HMQ-H1 |
| Bore Code | 39 |
| Center Distance | 5.2 In. |
| Center Distance Range | Above 3.25" |
| Gear Type | Worm |
| Housing material | Cast Iron |
| HP Range | 7-1/2 HP to (< 10)HP |
| Input Bore (C Face) | 1.125 |
| Input Flange | 182-4TC |
| Input HP | 1.592 |
| Input Keyway (C Face) | 1/4 X 1/8 |
| Input RPM | 100 |
| Input Style | Quill |
| Model Code | HMQ852 |
| Motor Frame Size | 180 |
| No. of Gear Reductions | Single |
| Output | Hollow |
| Output Diameter (in) | 2.438 |
| Output HP | 0.903 |
| Output Key | 5/8 X 4.00 |
| Output RPM | 2.5 |
| Output Shaft Direction | H1 |
| Output Torque (lb-in) | 22772 |
| Output Torque Range | 5000 to 10000 in lbs |
| Output Torque Rating (in-lb) | 9419 |
| Overhung Load Rating (Output Shaft(lb)) | 3560 |
| Paint/Coating | Blue |
| Product Type | Right Angle |
| Ratio | 40 |
| Ratio Range | 40:01:00 |
| Reducer | Worm - Right Angle |
| Series | GR Series - Ironman Worm Gear Reducers |
| Series Code | GR |
| Service Factor | 1 |
| Shaft Seal Material | Viton |
| Thrust Rating - output shaft | 3412 |
GR8520604.39