Dodge 23S12H 12:1 Ratio Hollow Bore 0.875" Input Shaft 2.3" Center Distance Green PaintRatio: 12:1Center Distance: 2.3"Input: 0.
- Write a review
$1,324.70
Base to output center height2.5000 in, 63.5 mmBore dia output1.4380 in, 36.525 mmBore length6.6200 in, 168.148 mmCase size23Center distance (in)2.3 in, Center distance (in):2.3100 in, 58.674 mmHorsepower rating input2.9100 hp, 2.17 kWHorsepower rating output2.5600 hp, 1.909 kWHousing materialCast ironInput0.875 in Input ShaftInput HP2.91Input styleSeparateLubrication typePAG, standard temperatureMounting bolt pattern length5.0000 in, 127.0 mmMounting bolt pattern width2.8800 in, 73.152 mmNominal ratio12OutputHollow boreOutput bore/shaft diameter1.4375 inOutput horse power2.56Output shaftHollowOutput styleHollowOverhung load1610 lbf, 7161.637 NPaint typeStandardPaint/coatingGreenRated torque output1170 in/lb, 1170.0 in/lbRatio12 to 1Seal typeSingle-lip contactShaft dia input0.8750 inShaft length input1.1700 in, 29.718 mmSuitable for washdownNoThermal horsepower rating3.7800 hp, 2.819 kW
Specifications
| Base to output center height | 2.5000 in, 63.5 mm |
| Bore dia output | 1.4380 in, 36.525 mm |
| Bore length | 6.6200 in, 168.148 mm |
| Case size | 23 |
| Center distance (in) | 2.3 in, Center distance (in):2.3100 in, 58.674 mm |
| Horsepower rating input | 2.9100 hp, 2.17 kW |
| Horsepower rating output | 2.5600 hp, 1.909 kW |
| Housing material | Cast iron |
| Input | 0.875 in Input Shaft |
| Input HP | 2.91 |
| Input style | Separate |
| Lubrication type | PAG, standard temperature |
| Mounting bolt pattern length | 5.0000 in, 127.0 mm |
| Mounting bolt pattern width | 2.8800 in, 73.152 mm |
| Nominal ratio | 12 |
| Output | Hollow bore |
| Output bore/shaft diameter | 1.4375 in |
| Output horse power | 2.56 |
| Output shaft | Hollow |
| Output style | Hollow |
| Overhung load | 1610 lbf, 7161.637 N |
| Paint type | Standard |
| Paint/coating | Green |
| Rated torque output | 1170 in/lb, 1170.0 in/lb |
| Ratio | 12 to 1 |
| Seal type | Single-lip contact |
| Shaft dia input | 0.8750 in |
| Shaft length input | 1.1700 in, 29.718 mm |
| Suitable for washdown | No |
| Thermal horsepower rating | 3.7800 hp, 2.819 kW |
23S12H