Morse 325Q140L50 XI1159 50:1 Ratio 3.25" Center Distance 0.875" Input Bore (C Face) 0.875" Input Diameter C-Face Quill Input 1.3
- Write a review
$2,738.04
AssemblyQ-LCenter Distance Range1" thru 3.25"Centre Distance3-1/4 inEfficiency80Frame Size140TCGear Ratio50:1Gear TypeWormH-Tap size7/16 - 14HP1HP Range2HP (< 3)Input Bore (C Face)0.875Input HP @ 1750 RPM2.05Input Keyway (C Face)3/16 X 3/32Input Maximum Speed1750 rpmInput Size0.63 in DiaInput TypeC-Face QuilledKeyway Size0.1875 x 1.63 in InputLength11.16 inLubrication TypePolyglycol OilMaterialCast IronModel325QMounting TypeDirect/FloorNo. of Gear ReductionsSingleOutput Diameter (in)1.375Output Key5/16 X 2.88Output Maximum Speed35 rpmOutput RPM35Output Shaft Assembly CodeLOutput Shaft DirectionLeftOutput Size1.38 in Dia x 3.66 in LOutput Torque Range2500 to 5000 in lbsOutput Torque Rating (in-lb)3315 in-lbs @1750 input RPMOutput TypeLeft HandOverhung Load Rating (Output Shaft(lb))2401Product TypeWorm Speed ReducerReducerWorm - Right AngleReducer StyleStandardSeries CodeRaiderService Factor1Shaft Seal MaterialNitrileTAP Depth0.8Thrust Rating - output shaft3410Torque Rating88.67 in-lb Input/35 in-lb OutputTypeSingle Reduction StandardWidth10.7 in
Specifications
| Assembly | Q-L |
| Center Distance Range | 1" thru 3.25" |
| Centre Distance | 3-1/4 in |
| Efficiency | 80 |
| Frame Size | 140TC |
| Gear Ratio | 50:1 |
| Gear Type | Worm |
| H-Tap size | 7/16 - 14 |
| HP | 1 |
| HP Range | 2HP (< 3) |
| Input Bore (C Face) | 0.875 |
| Input HP @ 1750 RPM | 2.05 |
| Input Keyway (C Face) | 3/16 X 3/32 |
| Input Maximum Speed | 1750 rpm |
| Input Size | 0.63 in Dia |
| Input Type | C-Face Quilled |
| Keyway Size | 0.1875 x 1.63 in Input |
| Length | 11.16 in |
| Lubrication Type | Polyglycol Oil |
| Material | Cast Iron |
| Model | 325Q |
| Mounting Type | Direct/Floor |
| No. of Gear Reductions | Single |
| Output Diameter (in) | 1.375 |
| Output Key | 5/16 X 2.88 |
| Output Maximum Speed | 35 rpm |
| Output RPM | 35 |
| Output Shaft Assembly Code | L |
| Output Shaft Direction | Left |
| Output Size | 1.38 in Dia x 3.66 in L |
| Output Torque Range | 2500 to 5000 in lbs |
| Output Torque Rating (in-lb) | 3315 in-lbs @1750 input RPM |
| Output Type | Left Hand |
| Overhung Load Rating (Output Shaft(lb)) | 2401 |
| Product Type | Worm Speed Reducer |
| Reducer | Worm - Right Angle |
| Reducer Style | Standard |
| Series Code | Raider |
| Service Factor | 1 |
| Shaft Seal Material | Nitrile |
| TAP Depth | 0.8 |
| Thrust Rating - output shaft | 3410 |
| Torque Rating | 88.67 in-lb Input/35 in-lb Output |
| Type | Single Reduction Standard |
| Width | 10.7 in |
XI1159