Grove Gear GR-BM842-10-D-210 10:1 Ratio, 1.25" Input Diameter, 1.875" Output Diameter, Right Angle Cast Iron Single-Reduction Wo
- Write a review
$3,014.99
AssemblyBM-DCenter Distance4.2 In.Center distance (in)4.25Center Distance RangeAbove 3.25"Gear Drive ReductionsSingleGear TypeWormH-Tap Size5/8 - 11 UNCHousing materialCast ironHP Range10 HP (< 15)Input Bore (C Face)1.375Input Diameter (in)1.25Input Flange213-5TCInput HP14.93Input HP @ 1750 RPM14.93Input Keyway (C Face)5/16 x 5/32Input RPM1750Input Style3-Piece CoupledKeyway1/4 X 2.50Max OHL (Output Shaft)3010Max Thrust Load (Output Shaft)1788Model CodeBM842Motor Frame Size210TCMounting StyleBaseNo. of Gear ReductionsSingleOutputLeft & RightOutput Diameter (in)1.875Output HP14Output Key1/2 X 3.06Output RPM175Output Shaft Assembly CodeDOutput Shaft DirectionDoubleOutput Shaft OrientationLROutput StyleDOutput Torque5042Output Torque (lb-in)5042Output Torque Range5000 to 10000 in lbsOutput typeSolid ShaftOverhung Load3010Paint/CoatingBlueProduct LineGR Series - Ironman Worm Gear ReducersProduct TypeWorm Speed ReducerRatio10 to 1Ratio Range10-1ReducerWorm - Right AngleReducer StyleWorm - Right AngleReducer TypeSingleSeriesGR Series - Ironman Worm Gear ReducersSeries CodeGRSeries StyleGR-BM-DService Factor1Shaft Seal MaterialVitonSize210TCTAP Depth1Thrust Rating - output shaft1788
Specifications
| Assembly | BM-D |
| Center Distance | 4.2 In. |
| Center distance (in) | 4.25 |
| Center Distance Range | Above 3.25" |
| Gear Drive Reductions | Single |
| Gear Type | Worm |
| H-Tap Size | 5/8 - 11 UNC |
| Housing material | Cast iron |
| HP Range | 10 HP (< 15) |
| Input Bore (C Face) | 1.375 |
| Input Diameter (in) | 1.25 |
| Input Flange | 213-5TC |
| Input HP | 14.93 |
| Input HP @ 1750 RPM | 14.93 |
| Input Keyway (C Face) | 5/16 x 5/32 |
| Input RPM | 1750 |
| Input Style | 3-Piece Coupled |
| Keyway | 1/4 X 2.50 |
| Max OHL (Output Shaft) | 3010 |
| Max Thrust Load (Output Shaft) | 1788 |
| Model Code | BM842 |
| Motor Frame Size | 210TC |
| Mounting Style | Base |
| No. of Gear Reductions | Single |
| Output | Left & Right |
| Output Diameter (in) | 1.875 |
| Output HP | 14 |
| Output Key | 1/2 X 3.06 |
| Output RPM | 175 |
| Output Shaft Assembly Code | D |
| Output Shaft Direction | Double |
| Output Shaft Orientation | LR |
| Output Style | D |
| Output Torque | 5042 |
| Output Torque (lb-in) | 5042 |
| Output Torque Range | 5000 to 10000 in lbs |
| Output type | Solid Shaft |
| Overhung Load | 3010 |
| Paint/Coating | Blue |
| Product Line | GR Series - Ironman Worm Gear Reducers |
| Product Type | Worm Speed Reducer |
| Ratio | 10 to 1 |
| Ratio Range | 10-1 |
| Reducer | Worm - Right Angle |
| Reducer Style | Worm - Right Angle |
| Reducer Type | Single |
| Series | GR Series - Ironman Worm Gear Reducers |
| Series Code | GR |
| Series Style | GR-BM-D |
| Service Factor | 1 |
| Shaft Seal Material | Viton |
| Size | 210TC |
| TAP Depth | 1 |
| Thrust Rating - output shaft | 1788 |
GR8420171.00