Grove Gear NH-BM832-30-D-180 30:1 Ratio, 0.875" Input Diameter, 1.5" Output Diameter, Right Angle Cast Iron Single-Reduction Wor
- Write a review
$1,941.79
AssemblyBM-DCenter Distance3.2 In.Center distance (in)3.25Center Distance Range1" thru 3.25"Gear Drive ReductionsSingleGear TypeWormH-Tap Size1/2 - 13 UNCHousing materialCast ironHP Range3HP (< 5)Input Bore (C Face)1.125Input Diameter (in)0.875Input Flange180TCInput HP3.619Input HP @ 1750 RPM3.003Input Keyway (C Face)1/4 x 1/8Input RPM1750Input Style3-Piece CoupledKeyway3/16 X 1.63Max OHL (Output Shaft)2250Max Thrust Load (Output Shaft)2574Model CodeBM832Motor Frame Size180Mounting StyleBaseNo. of Gear ReductionsSingleOutputLeft & RightOutput Diameter (in)1.500Output HP2.986Output Key3/8 x 2.25Output RPM58Output Shaft Assembly CodeDOutput Shaft DirectionDoubleOutput Shaft OrientationLROutput StyleDOutput Torque2651Output Torque Range2500 to 5000 in lbsOutput typeSolid ShaftOverhung Load2275Paint/CoatingBlueProduct LineNH Series - Ironman Narrow Housing Worm Gear ReducersProduct TypeRight AngleRatio30 to 1Ratio Range30-1ReducerWorm - Right AngleReducer StyleWorm - Right AngleReducer TypeSingleSeriesNH Series - Ironman Narrow Housing Worm Gear ReducersSeries CodeNHSeries StyleNH-BM-DService Factor1Shaft Seal MaterialVitonSize180TCTAP Depth1Thrust Rating - output shaft2574
Specifications
| Assembly | BM-D |
| Center Distance | 3.2 In. |
| Center distance (in) | 3.25 |
| Center Distance Range | 1" thru 3.25" |
| Gear Drive Reductions | Single |
| Gear Type | Worm |
| H-Tap Size | 1/2 - 13 UNC |
| Housing material | Cast iron |
| HP Range | 3HP (< 5) |
| Input Bore (C Face) | 1.125 |
| Input Diameter (in) | 0.875 |
| Input Flange | 180TC |
| Input HP | 3.619 |
| Input HP @ 1750 RPM | 3.003 |
| Input Keyway (C Face) | 1/4 x 1/8 |
| Input RPM | 1750 |
| Input Style | 3-Piece Coupled |
| Keyway | 3/16 X 1.63 |
| Max OHL (Output Shaft) | 2250 |
| Max Thrust Load (Output Shaft) | 2574 |
| Model Code | BM832 |
| Motor Frame Size | 180 |
| Mounting Style | Base |
| No. of Gear Reductions | Single |
| Output | Left & Right |
| Output Diameter (in) | 1.500 |
| Output HP | 2.986 |
| Output Key | 3/8 x 2.25 |
| Output RPM | 58 |
| Output Shaft Assembly Code | D |
| Output Shaft Direction | Double |
| Output Shaft Orientation | LR |
| Output Style | D |
| Output Torque | 2651 |
| Output Torque Range | 2500 to 5000 in lbs |
| Output type | Solid Shaft |
| Overhung Load | 2275 |
| Paint/Coating | Blue |
| Product Line | NH Series - Ironman Narrow Housing Worm Gear Reducers |
| Product Type | Right Angle |
| Ratio | 30 to 1 |
| Ratio Range | 30-1 |
| Reducer | Worm - Right Angle |
| Reducer Style | Worm - Right Angle |
| Reducer Type | Single |
| Series | NH Series - Ironman Narrow Housing Worm Gear Reducers |
| Series Code | NH |
| Series Style | NH-BM-D |
| Service Factor | 1 |
| Shaft Seal Material | Viton |
| Size | 180TC |
| TAP Depth | 1 |
| Thrust Rating - output shaft | 2574 |
NH8320093.00