Grove Gear GRG-BM832-10-D-210 10:1 Ratio, 0.875" Input Diameter, 1.5" Output Diameter, Right Angle Cast Iron Single-Reduction Wo
- Write a review
$1,950.82
AssemblyBM-DCenter Distance3.2 In.Center distance (in)3.25Center Distance Range1" thru 3.25"Gear Drive ReductionsSingleGear TypeWormH-Tap Size7/16-14 UNCHousing materialCast ironHP Range7-1/2 (< 10)Input Bore (C Face)1.375Input Diameter (in)0.875Input Flange210TCInput HP8.092Input HP @ 1750 RPM8.092Input Keyway (C Face)5/16 x 5/32Input RPM1750Input Style3-Piece CoupledKeyway3/16 X 1.63Max OHL (Output Shaft)2275Max Thrust Load (Output Shaft)2026Model CodeBM832Motor Frame Size210Mounting StyleBaseNo. of Gear ReductionsSingleOutputLeft & RightOutput Diameter (in)1.500Output HP7.497Output Key3/8 x 2.63Output RPM175Output Shaft Assembly CodeDOutput Shaft DirectionDoubleOutput Shaft OrientationLROutput StyleDOutput Torque2700Output Torque Range2500 to 5000 in lbsOutput typeSolid ShaftOverhung Load2170Paint/CoatingBlueProduct LineGRG Series - Ironman Worm Gear ReducersProduct TypeRight AngleRatio10 to 1Ratio Range10-1ReducerWorm - Right AngleReducer StyleWorm - Right AngleReducer TypeSingleSeriesGRG Series - Ironman Worm Gear ReducersSeries CodeGRGSeries StyleGRG-BM-DService Factor1Shaft Seal MaterialVitonSize210TCTAP Depth0.88Thrust Rating - output shaft2026
Specifications
| Assembly | BM-D |
| Center Distance | 3.2 In. |
| Center distance (in) | 3.25 |
| Center Distance Range | 1" thru 3.25" |
| Gear Drive Reductions | Single |
| Gear Type | Worm |
| H-Tap Size | 7/16-14 UNC |
| Housing material | Cast iron |
| HP Range | 7-1/2 (< 10) |
| Input Bore (C Face) | 1.375 |
| Input Diameter (in) | 0.875 |
| Input Flange | 210TC |
| Input HP | 8.092 |
| Input HP @ 1750 RPM | 8.092 |
| Input Keyway (C Face) | 5/16 x 5/32 |
| Input RPM | 1750 |
| Input Style | 3-Piece Coupled |
| Keyway | 3/16 X 1.63 |
| Max OHL (Output Shaft) | 2275 |
| Max Thrust Load (Output Shaft) | 2026 |
| Model Code | BM832 |
| Motor Frame Size | 210 |
| Mounting Style | Base |
| No. of Gear Reductions | Single |
| Output | Left & Right |
| Output Diameter (in) | 1.500 |
| Output HP | 7.497 |
| Output Key | 3/8 x 2.63 |
| Output RPM | 175 |
| Output Shaft Assembly Code | D |
| Output Shaft Direction | Double |
| Output Shaft Orientation | LR |
| Output Style | D |
| Output Torque | 2700 |
| Output Torque Range | 2500 to 5000 in lbs |
| Output type | Solid Shaft |
| Overhung Load | 2170 |
| Paint/Coating | Blue |
| Product Line | GRG Series - Ironman Worm Gear Reducers |
| Product Type | Right Angle |
| Ratio | 10 to 1 |
| Ratio Range | 10-1 |
| Reducer | Worm - Right Angle |
| Reducer Style | Worm - Right Angle |
| Reducer Type | Single |
| Series | GRG Series - Ironman Worm Gear Reducers |
| Series Code | GRG |
| Series Style | GRG-BM-D |
| Service Factor | 1 |
| Shaft Seal Material | Viton |
| Size | 210TC |
| TAP Depth | 0.88 |
| Thrust Rating - output shaft | 2026 |
GRG8320243.00