Grove Gear GR-BM852-5-L-250 5:1 Ratio, 1.25" Input Diameter, 2" Output Diameter, Right Angle Cast Iron Single-Reduction Worm Red
- Write a review
$4,410.22
AssemblyBM-LCenter Distance5.2 In.Center distance (in)5.25Center Distance RangeAbove 3.25"Gear Drive ReductionsSingleGear TypeWormH-Tap Size5/8-11 UNCHousing materialCast ironHP Range30 HP (< 50)Input Bore (C Face)1.625Input Diameter (in)1.25Input Flange254-6TCInput HP5.39Input HP @ 1750 RPM32.51Input RPM100Input Style3-Piece CoupledKeyway1/4 X 3.00Max OHL (Output Shaft)3100Max Thrust Load (Output Shaft)1675Model CodeBM852Motor Frame Size250Mounting StyleBaseNo. of Gear ReductionsSingleOutputLeftOutput Diameter (in)2Output HP31.17Output Key1/2 X 3.50Output RPM350Output Shaft Assembly CodeLOutput Shaft DirectionLeftOutput Shaft OrientationLOutput StyleLOutput Torque5753Output Torque (lb-in)15484Output Torque Range5000 to 10000 in lbsOutput typeSolid ShaftOverhung Load3100Paint/CoatingBlueProduct LineGR Series - Ironman Worm Gear ReducersProduct TypeRight AngleRatio5 to 1Ratio Range5-1ReducerWorm - Right AngleReducer StyleWorm - Right AngleReducer TypeSingleSeriesGR Series - Ironman Worm Gear ReducersSeries CodeGRSeries StyleGR-BM-LService Factor1Shaft Seal MaterialVitonSize250TCTAP Depth1.25Thrust Rating - output shaft1675
Specifications
| Assembly | BM-L |
| Center Distance | 5.2 In. |
| Center distance (in) | 5.25 |
| Center Distance Range | Above 3.25" |
| Gear Drive Reductions | Single |
| Gear Type | Worm |
| H-Tap Size | 5/8-11 UNC |
| Housing material | Cast iron |
| HP Range | 30 HP (< 50) |
| Input Bore (C Face) | 1.625 |
| Input Diameter (in) | 1.25 |
| Input Flange | 254-6TC |
| Input HP | 5.39 |
| Input HP @ 1750 RPM | 32.51 |
| Input RPM | 100 |
| Input Style | 3-Piece Coupled |
| Keyway | 1/4 X 3.00 |
| Max OHL (Output Shaft) | 3100 |
| Max Thrust Load (Output Shaft) | 1675 |
| Model Code | BM852 |
| Motor Frame Size | 250 |
| Mounting Style | Base |
| No. of Gear Reductions | Single |
| Output | Left |
| Output Diameter (in) | 2 |
| Output HP | 31.17 |
| Output Key | 1/2 X 3.50 |
| Output RPM | 350 |
| Output Shaft Assembly Code | L |
| Output Shaft Direction | Left |
| Output Shaft Orientation | L |
| Output Style | L |
| Output Torque | 5753 |
| Output Torque (lb-in) | 15484 |
| Output Torque Range | 5000 to 10000 in lbs |
| Output type | Solid Shaft |
| Overhung Load | 3100 |
| Paint/Coating | Blue |
| Product Line | GR Series - Ironman Worm Gear Reducers |
| Product Type | Right Angle |
| Ratio | 5 to 1 |
| Ratio Range | 5-1 |
| Reducer | Worm - Right Angle |
| Reducer Style | Worm - Right Angle |
| Reducer Type | Single |
| Series | GR Series - Ironman Worm Gear Reducers |
| Series Code | GR |
| Series Style | GR-BM-L |
| Service Factor | 1 |
| Shaft Seal Material | Viton |
| Size | 250TC |
| TAP Depth | 1.25 |
| Thrust Rating - output shaft | 1675 |
GR8520202.00