Grove Gear NH-H818-7.5-H1-16 7.5:1 Ratio, 0.625" Input Diameter, 1" Output Diameter, Right Angle Cast Iron Single-Reduction Worm
- Write a review
$995.03
AssemblyH-H1Bore Code16Center Distance1.8 In.Center distance (in)1.75Center Distance Range1" thru 3.25"Gear Drive ReductionsSingleGear TypeWormHousing materialCast ironHP Range1 to 1-1/2 (< 2)Input Diameter (in)0.625Input HP1.909Input HP @ 1750 RPM1.909Input RPM1750Input StyleSolid Input ShaftKeyway3/16 X 1.38Max OHL (Output Shaft)1250Max Thrust Load (Output Shaft)868Model CodeH818Mounting StyleShaft MountNo. of Gear ReductionsSingleOutputHollowOutput Diameter (in)1Output Hollow Shaft Diameter (in)1.000Output HP1.745Output Key1/4 X 3.00Output RPM233Output Shaft Assembly CodeH1Output Shaft DirectionH1Output Shaft OrientationH1Output StyleH1Output Torque471Output Torque Range250 to 500 in lbsOutput typeHollow boreOverhung Load Rating (Output Shaft(lb))1250Paint/CoatingBlueProduct LineNH Series - Ironman Narrow Housing Worm Gear ReducersProduct TypeRight AngleRatio7.5 to 1Ratio Range7.5-1ReducerWorm - Right AngleReducer StyleWorm - Right AngleReducer TypeSingleSeriesNH Series - Ironman Narrow Housing Worm Gear ReducersSeries CodeNHSeries StyleNH-H-H1Service Factor1Shaft Seal MaterialVitonThrust Rating - output shaft868
Specifications
| Assembly | H-H1 |
| Bore Code | 16 |
| Center Distance | 1.8 In. |
| Center distance (in) | 1.75 |
| Center Distance Range | 1" thru 3.25" |
| Gear Drive Reductions | Single |
| Gear Type | Worm |
| Housing material | Cast iron |
| HP Range | 1 to 1-1/2 (< 2) |
| Input Diameter (in) | 0.625 |
| Input HP | 1.909 |
| Input HP @ 1750 RPM | 1.909 |
| Input RPM | 1750 |
| Input Style | Solid Input Shaft |
| Keyway | 3/16 X 1.38 |
| Max OHL (Output Shaft) | 1250 |
| Max Thrust Load (Output Shaft) | 868 |
| Model Code | H818 |
| Mounting Style | Shaft Mount |
| No. of Gear Reductions | Single |
| Output | Hollow |
| Output Diameter (in) | 1 |
| Output Hollow Shaft Diameter (in) | 1.000 |
| Output HP | 1.745 |
| Output Key | 1/4 X 3.00 |
| Output RPM | 233 |
| Output Shaft Assembly Code | H1 |
| Output Shaft Direction | H1 |
| Output Shaft Orientation | H1 |
| Output Style | H1 |
| Output Torque | 471 |
| Output Torque Range | 250 to 500 in lbs |
| Output type | Hollow bore |
| Overhung Load Rating (Output Shaft(lb)) | 1250 |
| Paint/Coating | Blue |
| Product Line | NH Series - Ironman Narrow Housing Worm Gear Reducers |
| Product Type | Right Angle |
| Ratio | 7.5 to 1 |
| Ratio Range | 7.5-1 |
| Reducer | Worm - Right Angle |
| Reducer Style | Worm - Right Angle |
| Reducer Type | Single |
| Series | NH Series - Ironman Narrow Housing Worm Gear Reducers |
| Series Code | NH |
| Series Style | NH-H-H1 |
| Service Factor | 1 |
| Shaft Seal Material | Viton |
| Thrust Rating - output shaft | 868 |
NH8180502.16