Dodge 17S20H 20:1 Ratio Hollow Bore 0.625" Input Shaft 1.7" Center Distance Green PaintRatio: 20:1Center Distance: 1.7"Input: 0.
- Write a review
$1,004.23
Base to output center height1.9900 in, 50.546 mmBore dia output1.0000 in, 25.4 mmBore length5.4100 in, 137.414 mmCase size17Center distance (in)1.7 in, Center distance (in):1.7500 in, 44.45 mmFinishGreenHorsepower rating input1.0300 hp, 0.768 kWHorsepower rating output0.8400 hp, 0.626 kWHousing materialCast ironInput0.625 in Input ShaftInput HP1.03Input styleSeparate, Input style:Solid input shaftLubrication typePAG, standard temperatureMounting bolt pattern length4.1900 in, 106.426 mmMounting bolt pattern width2.7500 in, 69.85 mmNominal ratio20OutputHollow boreOutput bore/shaft diameter1 inOutput horse power0.84Output shaftHollowOutput styleHollowOverhung load1190 lbf, 5293.384 NPaint typeStandardPaint/coatingGreenRated torque output602 in/lb, 602.0 in/lbRatio20 to 1Seal typeSingle-lip contactShaft dia input0.6250 inShaft length input1.1500 in, 29.21 mmSuitable for washdownNoThermal horsepower rating1.5800 hp, 1.178 kW
Specifications
| Base to output center height | 1.9900 in, 50.546 mm |
| Bore dia output | 1.0000 in, 25.4 mm |
| Bore length | 5.4100 in, 137.414 mm |
| Case size | 17 |
| Center distance (in) | 1.7 in, Center distance (in):1.7500 in, 44.45 mm |
| Finish | Green |
| Horsepower rating input | 1.0300 hp, 0.768 kW |
| Horsepower rating output | 0.8400 hp, 0.626 kW |
| Housing material | Cast iron |
| Input | 0.625 in Input Shaft |
| Input HP | 1.03 |
| Input style | Separate, Input style:Solid input shaft |
| Lubrication type | PAG, standard temperature |
| Mounting bolt pattern length | 4.1900 in, 106.426 mm |
| Mounting bolt pattern width | 2.7500 in, 69.85 mm |
| Nominal ratio | 20 |
| Output | Hollow bore |
| Output bore/shaft diameter | 1 in |
| Output horse power | 0.84 |
| Output shaft | Hollow |
| Output style | Hollow |
| Overhung load | 1190 lbf, 5293.384 N |
| Paint type | Standard |
| Paint/coating | Green |
| Rated torque output | 602 in/lb, 602.0 in/lb |
| Ratio | 20 to 1 |
| Seal type | Single-lip contact |
| Shaft dia input | 0.6250 in |
| Shaft length input | 1.1500 in, 29.21 mm |
| Suitable for washdown | No |
| Thermal horsepower rating | 1.5800 hp, 1.178 kW |
17S20H