Grove Gear EL-H818-15-H_-16 15:1 Ratio, 0.625" Input Diameter, 1" Output Diameter, Right Angle Aluminum Single-Reduction Worm Re
- Write a review
$1,145.19
AssemblyH-H1Bore Code16Center Distance1.8 In.Center distance (in)1.75Center Distance Range1" thru 3.25"Gear Drive ReductionsSingleGear TypeWormHousing materialAluminumHP Range1 to 1-1/2 (< 2)Input Diameter (in)0.625Input HP1.224Input RPM1750Input StyleSolid Input ShaftKeyway3/16 X 1.38Model CodeH818Mounting StyleShaft MountNo. of Gear ReductionsSingleOutputHollowOutput Diameter (in)1.000Output Hollow Shaft Diameter (in)1.000Output HP1.058Output Key1/4 x 3.00Output RPM116Output Shaft Assembly CodeH1Output Shaft OrientationH1Output StyleH1Output Torque571Output Torque Range500 to 1000 in lbsOutput typeHollow borePaint/CoatingAluminumProduct LineEL Series - Aluminum Worm Gear ReducersProduct TypeRight AngleRatio15 to 1Ratio Range15-1ReducerWorm - Right AngleReducer StyleWorm - Right AngleReducer TypeSingleSeriesEL Series - Aluminum Worm Gear ReducersSeries StyleEL-H-H1Service Factor1Shaft Seal MaterialViton
Specifications
| Assembly | H-H1 |
| Bore Code | 16 |
| Center Distance | 1.8 In. |
| Center distance (in) | 1.75 |
| Center Distance Range | 1" thru 3.25" |
| Gear Drive Reductions | Single |
| Gear Type | Worm |
| Housing material | Aluminum |
| HP Range | 1 to 1-1/2 (< 2) |
| Input Diameter (in) | 0.625 |
| Input HP | 1.224 |
| Input RPM | 1750 |
| Input Style | Solid Input Shaft |
| Keyway | 3/16 X 1.38 |
| Model Code | H818 |
| Mounting Style | Shaft Mount |
| No. of Gear Reductions | Single |
| Output | Hollow |
| Output Diameter (in) | 1.000 |
| Output Hollow Shaft Diameter (in) | 1.000 |
| Output HP | 1.058 |
| Output Key | 1/4 x 3.00 |
| Output RPM | 116 |
| Output Shaft Assembly Code | H1 |
| Output Shaft Orientation | H1 |
| Output Style | H1 |
| Output Torque | 571 |
| Output Torque Range | 500 to 1000 in lbs |
| Output type | Hollow bore |
| Paint/Coating | Aluminum |
| Product Line | EL Series - Aluminum Worm Gear Reducers |
| Product Type | Right Angle |
| Ratio | 15 to 1 |
| Ratio Range | 15-1 |
| Reducer | Worm - Right Angle |
| Reducer Style | Worm - Right Angle |
| Reducer Type | Single |
| Series | EL Series - Aluminum Worm Gear Reducers |
| Series Style | EL-H-H1 |
| Service Factor | 1 |
| Shaft Seal Material | Viton |
EL8180504.16