Morse 175Q56L60 XD1100 60:1 Ratio 1.75" Center Distance 0.625" Input Bore (C Face) 0.625" Input Diameter C-Face Quill Input 0.87
- Write a review
$809.41
AssemblyQ-LCenter Distance (in)1.75 1.75Center Distance Range1" thru 3.25"Efficiency80Frame Size56CGear Ratio60:1Gear TypeWormH-Tap size5/16 - 18Height10.5Housing MaterialCast IronHP Range1/3 HP or Less (< 1/2)Input Bore (C Face)0.625Input Diameter (in)0.625Input HP @ 1750 RPM0.35Input Keyway (C Face)3/16 X 3/32Input RPM1750Input Speed1750Input StyleC-Face QuillLength10.69Model175QMounting TypeNo BaseNo. of Gear ReductionsSingleOutput Diameter (in)0.875Output Key3/16 X 1.38Output RPM29.1Output Shaft Assembly CodeLOutput Shaft DirectionLeftOutput Torque Range500 to 1000 in lbsOutput Torque Rating (in-lb)623 in-lbs @1750 input RPMOutput TypeSolid ShaftOverhung Load Rating (Output Shaft(lb))740Product TypeWorm Speed ReducerRatio Range60:1ReducerWorm - Right AngleReducer StyleStandardSeries CodeRaiderService Factor1Shaft Seal MaterialNitrileTAP Depth0.61Thrust Rating - output shaft1399Width9.06
Specifications
| Assembly | Q-L |
| Center Distance (in) | 1.75 1.75 |
| Center Distance Range | 1" thru 3.25" |
| Efficiency | 80 |
| Frame Size | 56C |
| Gear Ratio | 60:1 |
| Gear Type | Worm |
| H-Tap size | 5/16 - 18 |
| Height | 10.5 |
| Housing Material | Cast Iron |
| HP Range | 1/3 HP or Less (< 1/2) |
| Input Bore (C Face) | 0.625 |
| Input Diameter (in) | 0.625 |
| Input HP @ 1750 RPM | 0.35 |
| Input Keyway (C Face) | 3/16 X 3/32 |
| Input RPM | 1750 |
| Input Speed | 1750 |
| Input Style | C-Face Quill |
| Length | 10.69 |
| Model | 175Q |
| Mounting Type | No Base |
| No. of Gear Reductions | Single |
| Output Diameter (in) | 0.875 |
| Output Key | 3/16 X 1.38 |
| Output RPM | 29.1 |
| Output Shaft Assembly Code | L |
| Output Shaft Direction | Left |
| Output Torque Range | 500 to 1000 in lbs |
| Output Torque Rating (in-lb) | 623 in-lbs @1750 input RPM |
| Output Type | Solid Shaft |
| Overhung Load Rating (Output Shaft(lb)) | 740 |
| Product Type | Worm Speed Reducer |
| Ratio Range | 60:1 |
| Reducer | Worm - Right Angle |
| Reducer Style | Standard |
| Series Code | Raider |
| Service Factor | 1 |
| Shaft Seal Material | Nitrile |
| TAP Depth | 0.61 |
| Thrust Rating - output shaft | 1399 |
| Width | 9.06 |
XD1100