Dodge 35A30LR18 30:1 Ratio Double Solid Output Shaft 180TC Flange 3.5" Center Distance Green PaintRatio: 30:1Center Distance: 3.
- Write a review
$2,877.32
Base to output center height3.9900 in, 101.346 mmCase size35Center distance (in)3.5 in, Center distance (in):3.5000 in, 88.9 mmCenter to end of shaft distance7.0600 in, 179.324 mmFinishGreenGearbox component typeGearboxHorsepower rating input4.1500 hp, 3.095 kWHorsepower rating output3.4100 hp, 2.543 kWHousing materialCast ironInput180TC flangeInput flange180TCInput HP4.15Input style3-Piece coupledLubrication typePAG, standard temperatureMotor compatibilityNEMA motor, 180TC frameMounting bolt pattern length7.5000 in, 190.5 mmMounting bolt pattern width4.0000 in, 101.6 mmNominal ratio30OutputDouble solid output shaftOutput bore/shaft diameter1.5 inOutput horse power3.41Output shaftDouble (solid)Output shaft center to input motor mounting face distance11.1500 in, 283.21 mmOutput styleLeft, rightOverhung load2760 lbf, 12277.092 NPaint typeStandardPaint/coatingGreenRated torque output3682 in/lb, 3682.0 in/lbRatio30 to 1Seal typeSingle-lip contactShaft diameter output1.5000 in, 38.1 mmShaft length output3.5100 in, 89.154 mmSuitable for washdownNoThermal horsepower rating4.4300 hp, 3.303 kW
Specifications
| Base to output center height | 3.9900 in, 101.346 mm |
| Case size | 35 |
| Center distance (in) | 3.5 in, Center distance (in):3.5000 in, 88.9 mm |
| Center to end of shaft distance | 7.0600 in, 179.324 mm |
| Finish | Green |
| Gearbox component type | Gearbox |
| Horsepower rating input | 4.1500 hp, 3.095 kW |
| Horsepower rating output | 3.4100 hp, 2.543 kW |
| Housing material | Cast iron |
| Input | 180TC flange |
| Input flange | 180TC |
| Input HP | 4.15 |
| Input style | 3-Piece coupled |
| Lubrication type | PAG, standard temperature |
| Motor compatibility | NEMA motor, 180TC frame |
| Mounting bolt pattern length | 7.5000 in, 190.5 mm |
| Mounting bolt pattern width | 4.0000 in, 101.6 mm |
| Nominal ratio | 30 |
| Output | Double solid output shaft |
| Output bore/shaft diameter | 1.5 in |
| Output horse power | 3.41 |
| Output shaft | Double (solid) |
| Output shaft center to input motor mounting face distance | 11.1500 in, 283.21 mm |
| Output style | Left, right |
| Overhung load | 2760 lbf, 12277.092 N |
| Paint type | Standard |
| Paint/coating | Green |
| Rated torque output | 3682 in/lb, 3682.0 in/lb |
| Ratio | 30 to 1 |
| Seal type | Single-lip contact |
| Shaft diameter output | 1.5000 in, 38.1 mm |
| Shaft length output | 3.5100 in, 89.154 mm |
| Suitable for washdown | No |
| Thermal horsepower rating | 4.4300 hp, 3.303 kW |
35A30LR18