Grove Gear NH-HM842-80-H1-140-35 80:1 Ratio, 1.25" Input Diameter, 2.188" Output Diameter, Right Angle Cast Iron Single-Reductio
- Write a review
$3,995.05
AssemblyHM-H1Bore Code35Center Distance4.2 In.Center distance (in)4.25Center Distance RangeAbove 3.25"Gear Drive ReductionsSingleGear TypeWormHousing materialCast ironHP Range1 to 1-1/2 (< 2)Input Bore (C Face)0.875Input Diameter (in)1.25Input Flange140TCInput HP1.76Input HP @ 1750 RPM1.76Input Keyway (C Face)3/16 x 3/32Input RPM1750Input Style3-Piece CoupledKeyway1/4 X 2.50Max OHL (Output Shaft)3740Max Thrust Load (Output Shaft)2533Model CodeHM842Motor Frame Size140TCMounting StyleShaft MountNo. of Gear ReductionsSingleOutputHollowOutput Diameter (in)2.188Output Hollow Shaft Diameter (in)2.188Output HP1.257Output Key1/2 X 3.38Output RPM21Output Shaft Assembly CodeH1Output Shaft DirectionH1Output Shaft OrientationH1Output StyleH1Output Torque3620Output Torque Range2500 to 5000 in lbsOutput typeHollow boreOverhung Load Rating (Output Shaft(lb))3740Paint/CoatingBlueProduct LineNH Series - Ironman Narrow Housing Worm Gear ReducersProduct TypeRight AngleRatio80 to 1Ratio Range80-1ReducerWorm - Right AngleReducer StyleWorm - Right AngleReducer TypeSingleSeriesNH Series - Ironman Narrow Housing Worm Gear ReducersSeries CodeNHSeries StyleNH-HM-H1Service Factor1Shaft Seal MaterialVitonSize140TCThrust Rating - output shaft2533
Specifications
| Assembly | HM-H1 |
| Bore Code | 35 |
| Center Distance | 4.2 In. |
| Center distance (in) | 4.25 |
| Center Distance Range | Above 3.25" |
| Gear Drive Reductions | Single |
| Gear Type | Worm |
| Housing material | Cast iron |
| HP Range | 1 to 1-1/2 (< 2) |
| Input Bore (C Face) | 0.875 |
| Input Diameter (in) | 1.25 |
| Input Flange | 140TC |
| Input HP | 1.76 |
| Input HP @ 1750 RPM | 1.76 |
| Input Keyway (C Face) | 3/16 x 3/32 |
| Input RPM | 1750 |
| Input Style | 3-Piece Coupled |
| Keyway | 1/4 X 2.50 |
| Max OHL (Output Shaft) | 3740 |
| Max Thrust Load (Output Shaft) | 2533 |
| Model Code | HM842 |
| Motor Frame Size | 140TC |
| Mounting Style | Shaft Mount |
| No. of Gear Reductions | Single |
| Output | Hollow |
| Output Diameter (in) | 2.188 |
| Output Hollow Shaft Diameter (in) | 2.188 |
| Output HP | 1.257 |
| Output Key | 1/2 X 3.38 |
| Output RPM | 21 |
| Output Shaft Assembly Code | H1 |
| Output Shaft Direction | H1 |
| Output Shaft Orientation | H1 |
| Output Style | H1 |
| Output Torque | 3620 |
| Output Torque Range | 2500 to 5000 in lbs |
| Output type | Hollow bore |
| Overhung Load Rating (Output Shaft(lb)) | 3740 |
| Paint/Coating | Blue |
| Product Line | NH Series - Ironman Narrow Housing Worm Gear Reducers |
| Product Type | Right Angle |
| Ratio | 80 to 1 |
| Ratio Range | 80-1 |
| Reducer | Worm - Right Angle |
| Reducer Style | Worm - Right Angle |
| Reducer Type | Single |
| Series | NH Series - Ironman Narrow Housing Worm Gear Reducers |
| Series Code | NH |
| Series Style | NH-HM-H1 |
| Service Factor | 1 |
| Shaft Seal Material | Viton |
| Size | 140TC |
| Thrust Rating - output shaft | 2533 |
NH8420535.35