Grove Gear NH-H852-50-H1-48 50:1 Ratio, 1.25" Input Diameter, 3" Output Diameter, Right Angle Cast Iron Single-Reduction Worm Re
- Write a review
$5,403.70
AssemblyH-H1Bore Code48Center Distance5.2 In.Center distance (in)5.25Center Distance RangeAbove 3.25"Gear Drive ReductionsSingleGear TypeWormHousing materialCast ironHP Range5HP (< 7-1/2)Input Diameter (in)1.25Input HP6.777Input HP @ 1750 RPM6.777Input RPM1750Input StyleSolid Input ShaftKeyway1/4 X 3.00Max OHL (Output Shaft)3560Max Thrust Load (Output Shaft)3412Model CodeH852Mounting StyleShaft MountNo. of Gear ReductionsSingleOutputHollowOutput Diameter (in)3Output Hollow Shaft Diameter (in)3.000Output HP5.199Output Key3/4 X 4.00Output RPM35Output Shaft Assembly CodeH1Output Shaft DirectionH1Output Shaft OrientationH1Output StyleH1Output Torque9362Output Torque Range5000 to 10000 in lbsOutput typeHollow boreOverhung Load Rating (Output Shaft(lb))3560Paint/CoatingBlueProduct LineNH Series - Ironman Narrow Housing Worm Gear ReducersProduct TypeRight AngleRatio50 to 1Ratio Range50-1ReducerWorm - Right AngleReducer StyleWorm - Right AngleReducer TypeSingleSeriesNH Series - Ironman Narrow Housing Worm Gear ReducersSeries CodeNHSeries StyleNH-H-H1Service Factor1Shaft Seal MaterialVitonThrust Rating - output shaft3412
Specifications
| Assembly | H-H1 |
| Bore Code | 48 |
| Center Distance | 5.2 In. |
| Center distance (in) | 5.25 |
| Center Distance Range | Above 3.25" |
| Gear Drive Reductions | Single |
| Gear Type | Worm |
| Housing material | Cast iron |
| HP Range | 5HP (< 7-1/2) |
| Input Diameter (in) | 1.25 |
| Input HP | 6.777 |
| Input HP @ 1750 RPM | 6.777 |
| Input RPM | 1750 |
| Input Style | Solid Input Shaft |
| Keyway | 1/4 X 3.00 |
| Max OHL (Output Shaft) | 3560 |
| Max Thrust Load (Output Shaft) | 3412 |
| Model Code | H852 |
| Mounting Style | Shaft Mount |
| No. of Gear Reductions | Single |
| Output | Hollow |
| Output Diameter (in) | 3 |
| Output Hollow Shaft Diameter (in) | 3.000 |
| Output HP | 5.199 |
| Output Key | 3/4 X 4.00 |
| Output RPM | 35 |
| Output Shaft Assembly Code | H1 |
| Output Shaft Direction | H1 |
| Output Shaft Orientation | H1 |
| Output Style | H1 |
| Output Torque | 9362 |
| Output Torque Range | 5000 to 10000 in lbs |
| Output type | Hollow bore |
| Overhung Load Rating (Output Shaft(lb)) | 3560 |
| Paint/Coating | Blue |
| Product Line | NH Series - Ironman Narrow Housing Worm Gear Reducers |
| Product Type | Right Angle |
| Ratio | 50 to 1 |
| Ratio Range | 50-1 |
| Reducer | Worm - Right Angle |
| Reducer Style | Worm - Right Angle |
| Reducer Type | Single |
| Series | NH Series - Ironman Narrow Housing Worm Gear Reducers |
| Series Code | NH |
| Series Style | NH-H-H1 |
| Service Factor | 1 |
| Shaft Seal Material | Viton |
| Thrust Rating - output shaft | 3412 |
NH8520509.48