Dodge 20S20HWP 20:1 Ratio Hollow Bore 0.625" Input Shaft 2" Center Distance White PaintRatio: 20:1Center Distance: 2"Input: 0.62
- Write a review
$1,321.94
Base to output center height2.2400 in, 56.896 mmBore dia output1.2500 in, 31.75 mmBore length5.7000 in, 144.78 mmCase size20Center distance (in)2 in, Center distance (in):2.0000 in, 50.8 mmFinishWhite epoxyHorsepower rating input1.3400 hp, 0.999 kWHorsepower rating output1.1100 hp, 0.828 kWHousing materialCast ironInput0.625 in Input ShaftInput HP1.34Input styleSeparate, Input style:Solid input shaftLubrication typePAG, standard temperatureMounting bolt pattern length5.0000 in, 127.0 mmMounting bolt pattern width2.8800 in, 73.152 mmNominal ratio20OutputHollow boreOutput bore/shaft diameter1.25 inOutput horse power1.11Output styleHollowOverhung load1560 lbf, 6939.226 NPaint typeWhite epoxyPaint/coatingWhiteRated torque output796 in/lb, 796.0 in/lbRatio20 to 1Seal typeSingle-lip contactShaft dia input0.6250 inShaft length input1.1500 in, 29.21 mmSuitable for washdownNoThermal horsepower rating1.9900 hp, 1.484 kW
Specifications
| Base to output center height | 2.2400 in, 56.896 mm |
| Bore dia output | 1.2500 in, 31.75 mm |
| Bore length | 5.7000 in, 144.78 mm |
| Case size | 20 |
| Center distance (in) | 2 in, Center distance (in):2.0000 in, 50.8 mm |
| Finish | White epoxy |
| Horsepower rating input | 1.3400 hp, 0.999 kW |
| Horsepower rating output | 1.1100 hp, 0.828 kW |
| Housing material | Cast iron |
| Input | 0.625 in Input Shaft |
| Input HP | 1.34 |
| Input style | Separate, Input style:Solid input shaft |
| Lubrication type | PAG, standard temperature |
| Mounting bolt pattern length | 5.0000 in, 127.0 mm |
| Mounting bolt pattern width | 2.8800 in, 73.152 mm |
| Nominal ratio | 20 |
| Output | Hollow bore |
| Output bore/shaft diameter | 1.25 in |
| Output horse power | 1.11 |
| Output style | Hollow |
| Overhung load | 1560 lbf, 6939.226 N |
| Paint type | White epoxy |
| Paint/coating | White |
| Rated torque output | 796 in/lb, 796.0 in/lb |
| Ratio | 20 to 1 |
| Seal type | Single-lip contact |
| Shaft dia input | 0.6250 in |
| Shaft length input | 1.1500 in, 29.21 mm |
| Suitable for washdown | No |
| Thermal horsepower rating | 1.9900 hp, 1.484 kW |
20S20HWP