Dodge 13S25HWP 25:1 Ratio Hollow Bore 0.5" Input Shaft 1.3" Center Distance White PaintRatio: 25:1Center Distance: 1.3"Input: 0.
- Write a review
$1,001.47
Base to output center height1.7100 in, 43.434 mmBore dia output0.7500 in, 19.05 mmBore length4.7400 in, 120.396 mmCase size13Center distance (in)1.3 in, Center distance (in):1.3300 in, 33.782 mmFinishWhite epoxyGearbox component typeGearboxHorsepower rating input0.4600 hp, 0.343 kWHorsepower rating output0.3500 hp, 0.261 kWHousing materialCast ironInput0.5 in Input ShaftInput HP0.46Input styleSeparate, Input style:Solid input shaftLubrication typePAG, standard temperatureMounting bolt pattern length3.2500 in, 82.55 mmMounting bolt pattern width2.0000 in, 50.8 mmNominal ratio25OutputHollow boreOutput bore/shaft diameter0.75 inOutput horse power0.35Output styleHollowOverhung load650 lbf, 2891.344 NPaint typeWhite epoxyPaint/coatingWhiteRated torque output311 in/lb, 311.0 in/lbRatio25 to 1Seal typeSingle-lip contactShaft dia input0.5000 inShaft length input1.2200 in, 30.988 mmSuitable for washdownNoThermal horsepower rating0.8600 hp, 0.641 kW
Specifications
| Base to output center height | 1.7100 in, 43.434 mm |
| Bore dia output | 0.7500 in, 19.05 mm |
| Bore length | 4.7400 in, 120.396 mm |
| Case size | 13 |
| Center distance (in) | 1.3 in, Center distance (in):1.3300 in, 33.782 mm |
| Finish | White epoxy |
| Gearbox component type | Gearbox |
| Horsepower rating input | 0.4600 hp, 0.343 kW |
| Horsepower rating output | 0.3500 hp, 0.261 kW |
| Housing material | Cast iron |
| Input | 0.5 in Input Shaft |
| Input HP | 0.46 |
| Input style | Separate, Input style:Solid input shaft |
| Lubrication type | PAG, standard temperature |
| Mounting bolt pattern length | 3.2500 in, 82.55 mm |
| Mounting bolt pattern width | 2.0000 in, 50.8 mm |
| Nominal ratio | 25 |
| Output | Hollow bore |
| Output bore/shaft diameter | 0.75 in |
| Output horse power | 0.35 |
| Output style | Hollow |
| Overhung load | 650 lbf, 2891.344 N |
| Paint type | White epoxy |
| Paint/coating | White |
| Rated torque output | 311 in/lb, 311.0 in/lb |
| Ratio | 25 to 1 |
| Seal type | Single-lip contact |
| Shaft dia input | 0.5000 in |
| Shaft length input | 1.2200 in, 30.988 mm |
| Suitable for washdown | No |
| Thermal horsepower rating | 0.8600 hp, 0.641 kW |
13S25HWP