Morse 175Q140LR5 XD1141 5:1 Ratio 1.75" Center Distance 0.875" Input Bore (C Face) 0.875" Input Diameter C-Face Quill Input 0.87
- Write a review
$934.87
AssemblyQ-LRCenter Distance (in)1.75 1.75Center Distance Range1" thru 3.25"Efficiency80Frame Size140TCGear Ratio5:1Gear TypeWormH-Tap size5/16 - 18Housing MaterialCast IronHP Range2HP (< 3)Input Bore (C Face)0.875Input Diameter (in)0.875Input HP @ 1750 RPM2.45Input Keyway (C Face)3/16 X 3/32Input RPM1750Input Speed1750Input StyleC-Face QuillModel175QMounting TypeNo BaseNo. of Gear ReductionsSingleOutput Diameter (in)0.875Output Key3/16 X 1.38Output RPM350Output Shaft Assembly CodeDOutput Shaft DirectionDoubleOutput Shaft OrientationLROutput Torque Range250 to 500 in lbsOutput Torque Rating (in-lb)436 in-lbs @1750 input RPMOutput TypeSolid ShaftOverhung Load Rating (Output Shaft(lb))663Product TypeWorm Speed ReducerRatio Range5:1ReducerWorm - Right AngleReducer StyleStandardSeries CodeRaiderService Factor1Shaft Seal MaterialNitrileTAP Depth0.61Thrust Rating - output shaft868
Specifications
| Assembly | Q-LR |
| Center Distance (in) | 1.75 1.75 |
| Center Distance Range | 1" thru 3.25" |
| Efficiency | 80 |
| Frame Size | 140TC |
| Gear Ratio | 5:1 |
| Gear Type | Worm |
| H-Tap size | 5/16 - 18 |
| Housing Material | Cast Iron |
| HP Range | 2HP (< 3) |
| Input Bore (C Face) | 0.875 |
| Input Diameter (in) | 0.875 |
| Input HP @ 1750 RPM | 2.45 |
| Input Keyway (C Face) | 3/16 X 3/32 |
| Input RPM | 1750 |
| Input Speed | 1750 |
| Input Style | C-Face Quill |
| Model | 175Q |
| Mounting Type | No Base |
| No. of Gear Reductions | Single |
| Output Diameter (in) | 0.875 |
| Output Key | 3/16 X 1.38 |
| Output RPM | 350 |
| Output Shaft Assembly Code | D |
| Output Shaft Direction | Double |
| Output Shaft Orientation | LR |
| Output Torque Range | 250 to 500 in lbs |
| Output Torque Rating (in-lb) | 436 in-lbs @1750 input RPM |
| Output Type | Solid Shaft |
| Overhung Load Rating (Output Shaft(lb)) | 663 |
| Product Type | Worm Speed Reducer |
| Ratio Range | 5:1 |
| Reducer | Worm - Right Angle |
| Reducer Style | Standard |
| Series Code | Raider |
| Service Factor | 1 |
| Shaft Seal Material | Nitrile |
| TAP Depth | 0.61 |
| Thrust Rating - output shaft | 868 |
XD1141