Grove Gear NH-HMQ852-15-H1-210-32 15:1 Ratio, 1.375" Input Diameter, 2" Output Diameter, Right Angle Cast Iron Single-Reduction
- Write a review
$6,045.99
AssemblyHMQ-H1Bore Code32Center Distance5.2 In.Center distance (in)5.25Center Distance RangeAbove 3.25"Gear Drive ReductionsSingleGear TypeWormHousing materialCast ironHP Range15 HP (< 20)Input Bore (C Face)1.375Input Diameter (in)1.375Input Flange210TCInput HP18.11Input HP @ 1750 RPM18.11Input Keyway (C Face)5/16 x 5/32Input RPM1750Input StyleQuillMax OHL (Output Shaft)3560Max Thrust Load (Output Shaft)3033Model CodeHMQ852Motor Frame Size210TCMounting StyleShaft MountNo. of Gear ReductionsSingleOutputHollowOutput Diameter (in)2.000Output Hollow Shaft Diameter (in)2.000Output HP16.55Output Key1/2 X 3.38Output RPM116Output Shaft Assembly CodeH1Output Shaft DirectionH1Output Shaft OrientationH1Output StyleH1Output Torque8941Output Torque Range5000 to 10000 in lbsOutput typeHollow boreOverhung Load Rating (Output Shaft(lb))3560Paint/CoatingBlueProduct LineNH Series - Ironman Narrow Housing Worm Gear ReducersProduct TypeRight AngleRatio15 to 1Ratio Range15-1ReducerWorm - Right AngleReducer StyleWorm - Right AngleReducer TypeSingleSeriesNH Series - Ironman Narrow Housing Worm Gear ReducersSeries CodeNHSeries StyleNH-HMQ-H1Service Factor1Shaft Seal MaterialVitonSize210TCThrust Rating - output shaft3033
Specifications
| Assembly | HMQ-H1 |
| Bore Code | 32 |
| Center Distance | 5.2 In. |
| Center distance (in) | 5.25 |
| Center Distance Range | Above 3.25" |
| Gear Drive Reductions | Single |
| Gear Type | Worm |
| Housing material | Cast iron |
| HP Range | 15 HP (< 20) |
| Input Bore (C Face) | 1.375 |
| Input Diameter (in) | 1.375 |
| Input Flange | 210TC |
| Input HP | 18.11 |
| Input HP @ 1750 RPM | 18.11 |
| Input Keyway (C Face) | 5/16 x 5/32 |
| Input RPM | 1750 |
| Input Style | Quill |
| Max OHL (Output Shaft) | 3560 |
| Max Thrust Load (Output Shaft) | 3033 |
| Model Code | HMQ852 |
| Motor Frame Size | 210TC |
| Mounting Style | Shaft Mount |
| No. of Gear Reductions | Single |
| Output | Hollow |
| Output Diameter (in) | 2.000 |
| Output Hollow Shaft Diameter (in) | 2.000 |
| Output HP | 16.55 |
| Output Key | 1/2 X 3.38 |
| Output RPM | 116 |
| Output Shaft Assembly Code | H1 |
| Output Shaft Direction | H1 |
| Output Shaft Orientation | H1 |
| Output Style | H1 |
| Output Torque | 8941 |
| Output Torque Range | 5000 to 10000 in lbs |
| Output type | Hollow bore |
| Overhung Load Rating (Output Shaft(lb)) | 3560 |
| Paint/Coating | Blue |
| Product Line | NH Series - Ironman Narrow Housing Worm Gear Reducers |
| Product Type | Right Angle |
| Ratio | 15 to 1 |
| Ratio Range | 15-1 |
| Reducer | Worm - Right Angle |
| Reducer Style | Worm - Right Angle |
| Reducer Type | Single |
| Series | NH Series - Ironman Narrow Housing Worm Gear Reducers |
| Series Code | NH |
| Series Style | NH-HMQ-H1 |
| Service Factor | 1 |
| Shaft Seal Material | Viton |
| Size | 210TC |
| Thrust Rating - output shaft | 3033 |
NH8520612.32