Morse 262Q56L40 XG1128 40:1 Ratio 2.62" Center Distance 0.625" Input Bore (C Face) 0.625" Input Diameter C-Face Quill Input 1.12
- Write a review
$1,393.74
AssemblyQ-LCenter Distance (in)2.62 2.62Center Distance Range1" thru 3.25"Efficiency80Frame Size56CGear Ratio40:1Gear TypeWormH-Tap size3/8 - 16Height11.75Housing MaterialCast IronHP Range1 to 1-1/2 (< 2)Input Bore (C Face)0.625Input Diameter (in)0.625Input HP @ 1750 RPM1.37Input Keyway (C Face)3/16 X 3/32Input RPM1750Input Speed1750Input StyleC-Face QuillLength16Model262QMounting TypeNo BaseNo. of Gear ReductionsSingleOutput Diameter (in)1.125Output Key1/4 X 2.00Output RPM43.7Output Shaft Assembly CodeLOutput Shaft DirectionLeftOutput Torque Range1000 to 2500 in lbsOutput Torque Rating (in-lb)1854 in-lbs @1750 input RPMOutput TypeSolid ShaftOverhung Load Rating (Output Shaft(lb))1295Product TypeWorm Speed ReducerRatio Range40:1ReducerWorm - Right AngleReducer StyleStandardSeries CodeRaiderService Factor1Shaft Seal MaterialNitrileTAP Depth0.58Thrust Rating - output shaft3096Width12.25
Specifications
| Assembly | Q-L |
| Center Distance (in) | 2.62 2.62 |
| Center Distance Range | 1" thru 3.25" |
| Efficiency | 80 |
| Frame Size | 56C |
| Gear Ratio | 40:1 |
| Gear Type | Worm |
| H-Tap size | 3/8 - 16 |
| Height | 11.75 |
| Housing Material | Cast Iron |
| HP Range | 1 to 1-1/2 (< 2) |
| Input Bore (C Face) | 0.625 |
| Input Diameter (in) | 0.625 |
| Input HP @ 1750 RPM | 1.37 |
| Input Keyway (C Face) | 3/16 X 3/32 |
| Input RPM | 1750 |
| Input Speed | 1750 |
| Input Style | C-Face Quill |
| Length | 16 |
| Model | 262Q |
| Mounting Type | No Base |
| No. of Gear Reductions | Single |
| Output Diameter (in) | 1.125 |
| Output Key | 1/4 X 2.00 |
| Output RPM | 43.7 |
| Output Shaft Assembly Code | L |
| Output Shaft Direction | Left |
| Output Torque Range | 1000 to 2500 in lbs |
| Output Torque Rating (in-lb) | 1854 in-lbs @1750 input RPM |
| Output Type | Solid Shaft |
| Overhung Load Rating (Output Shaft(lb)) | 1295 |
| Product Type | Worm Speed Reducer |
| Ratio Range | 40:1 |
| Reducer | Worm - Right Angle |
| Reducer Style | Standard |
| Series Code | Raider |
| Service Factor | 1 |
| Shaft Seal Material | Nitrile |
| TAP Depth | 0.58 |
| Thrust Rating - output shaft | 3096 |
| Width | 12.25 |
XG1128