Dodge 20S07HAWP 7:1 Ratio Hollow Bore 0.625" Input Shaft 2" Center Distance White PaintRatio: 7:1Center Distance: 2"Input: 0.625
- Write a review
$1,321.94
Base to output center height2.2400 in, 56.896 mmBore dia output1.1880 in, 30.175 mmBore length5.7000 in, 144.78 mmCase size20Center distance (in)2 in, Center distance (in):2.0000 in, 50.8 mmHorsepower rating input2.7800 hp, 2.073 kWHorsepower rating output2.5400 hp, 1.894 kWHousing materialCast ironInput0.625 in Input ShaftInput HP2.78Input styleSeparateLubrication typePAG, standard temperatureMounting bolt pattern length5.0000 in, 127.0 mmMounting bolt pattern width2.8800 in, 73.152 mmNominal ratio7OutputHollow boreOutput bore/shaft diameter1.875 inOutput horse power2.54Output styleHollow alternateOverhung load1560 lbf, 6939.226 NPaint typeWhite epoxyPaint/coatingWhiteRated torque output678 in/lb, 678.0 in/lbRatio7 to 1Seal typeSingle-lip contactShaft dia input0.6250 inShaft length input1.1500 in, 29.21 mmSuitable for washdownNoThermal horsepower rating4.1500 hp, 3.095 kW
Specifications
| Base to output center height | 2.2400 in, 56.896 mm |
| Bore dia output | 1.1880 in, 30.175 mm |
| Bore length | 5.7000 in, 144.78 mm |
| Case size | 20 |
| Center distance (in) | 2 in, Center distance (in):2.0000 in, 50.8 mm |
| Horsepower rating input | 2.7800 hp, 2.073 kW |
| Horsepower rating output | 2.5400 hp, 1.894 kW |
| Housing material | Cast iron |
| Input | 0.625 in Input Shaft |
| Input HP | 2.78 |
| Input style | Separate |
| Lubrication type | PAG, standard temperature |
| Mounting bolt pattern length | 5.0000 in, 127.0 mm |
| Mounting bolt pattern width | 2.8800 in, 73.152 mm |
| Nominal ratio | 7 |
| Output | Hollow bore |
| Output bore/shaft diameter | 1.875 in |
| Output horse power | 2.54 |
| Output style | Hollow alternate |
| Overhung load | 1560 lbf, 6939.226 N |
| Paint type | White epoxy |
| Paint/coating | White |
| Rated torque output | 678 in/lb, 678.0 in/lb |
| Ratio | 7 to 1 |
| Seal type | Single-lip contact |
| Shaft dia input | 0.6250 in |
| Shaft length input | 1.1500 in, 29.21 mm |
| Suitable for washdown | No |
| Thermal horsepower rating | 4.1500 hp, 3.095 kW |
20S07HAWP