Dodge 20S50LRWP 50:1 Ratio Double Solid Output Shaft 0.625" Input Shaft 2" Center Distance White PaintRatio: 50:1Center Distance
- Write a review
$1,077.44
Base to output center height2.2400 in, 56.896 mmCase size20Center distance (in)2 in, Center distance (in):2.0000 in, 50.8 mmCenter to end of shaft distance4.6900 in, 119.126 mmFinishWhite epoxyHorsepower rating input0.6400 hp, 0.477 kWHorsepower rating output0.4400 hp, 0.328 kWHousing materialCast ironInput0.625 in Input ShaftInput HP0.64Input styleSeparate, Input style:Solid input shaftLubrication typePAG, standard temperatureMounting bolt pattern length5.0000 in, 127.0 mmMounting bolt pattern width2.8800 in, 73.152 mmNominal ratio50OutputDouble solid output shaftOutput bore/shaft diameter1 inOutput horse power0.44Output styleLeft, rightOverhung load1560 lbf, 6939.226 NPaint typeWhite epoxyPaint/coatingWhiteRated torque output787 in/lb, 787.0 in/lbRatio50 to 1Seal typeSingle-lip contactShaft dia input0.6250 inShaft diameter output1.0000 in, 25.4 mmShaft length input1.1500 in, 29.21 mmShaft length output2.1100 in, 53.594 mmSuitable for washdownNoThermal horsepower rating1.0900 hp, 0.813 kW
Specifications
| Base to output center height | 2.2400 in, 56.896 mm |
| Case size | 20 |
| Center distance (in) | 2 in, Center distance (in):2.0000 in, 50.8 mm |
| Center to end of shaft distance | 4.6900 in, 119.126 mm |
| Finish | White epoxy |
| Horsepower rating input | 0.6400 hp, 0.477 kW |
| Horsepower rating output | 0.4400 hp, 0.328 kW |
| Housing material | Cast iron |
| Input | 0.625 in Input Shaft |
| Input HP | 0.64 |
| Input style | Separate, Input style:Solid input shaft |
| Lubrication type | PAG, standard temperature |
| Mounting bolt pattern length | 5.0000 in, 127.0 mm |
| Mounting bolt pattern width | 2.8800 in, 73.152 mm |
| Nominal ratio | 50 |
| Output | Double solid output shaft |
| Output bore/shaft diameter | 1 in |
| Output horse power | 0.44 |
| Output style | Left, right |
| Overhung load | 1560 lbf, 6939.226 N |
| Paint type | White epoxy |
| Paint/coating | White |
| Rated torque output | 787 in/lb, 787.0 in/lb |
| Ratio | 50 to 1 |
| Seal type | Single-lip contact |
| Shaft dia input | 0.6250 in |
| Shaft diameter output | 1.0000 in, 25.4 mm |
| Shaft length input | 1.1500 in, 29.21 mm |
| Shaft length output | 2.1100 in, 53.594 mm |
| Suitable for washdown | No |
| Thermal horsepower rating | 1.0900 hp, 0.813 kW |
20S50LRWP