Grove Gear GRG-BMQ832-100-D-56 100:1 Ratio, 0.625" Input Diameter, 1.5" Output Diameter, Right Angle Cast Iron Single-Reduction
- Write a review
$1,950.82
AssemblyBMQ-DCenter Distance3.2 In.Center distance (in)3.25Center Distance Range1" thru 3.25"Gear Drive ReductionsSingleGear TypeWormH-Tap Size7/16-14 UNCHousing materialCast ironHP Range1/2 to 3/4 HP (< 1)Input Bore (C Face)0.625Input Diameter (in)0.625Input Flange56CInput HP0.691Input HP @ 1750 RPM0.691Input Keyway (C Face)3/16 x 3/32Input RPM1750Input StyleQuillMax OHL (Output Shaft)2275Max Thrust Load (Output Shaft)2574Model CodeBMQ832Motor Frame Size56Mounting StyleBaseNo. of Gear ReductionsSingleOutputLeft & RightOutput Diameter (in)1.500Output HP0.435Output Key3/8 x 2.63Output RPM17Output Shaft Assembly CodeDOutput Shaft DirectionDoubleOutput Shaft OrientationLROutput StyleDOutput Torque1567Output Torque Range1000 to 2500 in lbsOutput typeSolid ShaftOverhung Load2275Paint/CoatingBlueProduct LineGRG Series - Ironman Worm Gear ReducersProduct TypeRight AngleRatio100 to 1Ratio Range100-1 to 250-1ReducerWorm - Right AngleReducer StyleWorm - Right AngleReducer TypeSingleSeriesGRG Series - Ironman Worm Gear ReducersSeries CodeGRGSeries StyleGRG-BMQ-DService Factor1Shaft Seal MaterialVitonSize56CTAP Depth0.88Thrust Rating - output shaft2574
Specifications
| Assembly | BMQ-D |
| Center Distance | 3.2 In. |
| Center distance (in) | 3.25 |
| Center Distance Range | 1" thru 3.25" |
| Gear Drive Reductions | Single |
| Gear Type | Worm |
| H-Tap Size | 7/16-14 UNC |
| Housing material | Cast iron |
| HP Range | 1/2 to 3/4 HP (< 1) |
| Input Bore (C Face) | 0.625 |
| Input Diameter (in) | 0.625 |
| Input Flange | 56C |
| Input HP | 0.691 |
| Input HP @ 1750 RPM | 0.691 |
| Input Keyway (C Face) | 3/16 x 3/32 |
| Input RPM | 1750 |
| Input Style | Quill |
| Max OHL (Output Shaft) | 2275 |
| Max Thrust Load (Output Shaft) | 2574 |
| Model Code | BMQ832 |
| Motor Frame Size | 56 |
| Mounting Style | Base |
| No. of Gear Reductions | Single |
| Output | Left & Right |
| Output Diameter (in) | 1.500 |
| Output HP | 0.435 |
| Output Key | 3/8 x 2.63 |
| Output RPM | 17 |
| Output Shaft Assembly Code | D |
| Output Shaft Direction | Double |
| Output Shaft Orientation | LR |
| Output Style | D |
| Output Torque | 1567 |
| Output Torque Range | 1000 to 2500 in lbs |
| Output type | Solid Shaft |
| Overhung Load | 2275 |
| Paint/Coating | Blue |
| Product Line | GRG Series - Ironman Worm Gear Reducers |
| Product Type | Right Angle |
| Ratio | 100 to 1 |
| Ratio Range | 100-1 to 250-1 |
| Reducer | Worm - Right Angle |
| Reducer Style | Worm - Right Angle |
| Reducer Type | Single |
| Series | GRG Series - Ironman Worm Gear Reducers |
| Series Code | GRG |
| Series Style | GRG-BMQ-D |
| Service Factor | 1 |
| Shaft Seal Material | Viton |
| Size | 56C |
| TAP Depth | 0.88 |
| Thrust Rating - output shaft | 2574 |
GRG8320264.00