Grove Gear NH-BMQ813-7.5-D-56 7.5:1 Ratio, 0.625" Input Diameter, 0.75" Output Diameter, Right Angle Cast Iron Single-Reduction
- Write a review
$605.90
AssemblyBMQ-DCenter Distance1.3 In.Center distance (in)1.33Center Distance Range1" thru 3.25"Gear Drive ReductionsSingleGear TypeWormH-Tap Size5/16 - 18 UNCHousing materialCast ironHP Range1 to 1-1/2 (< 2)Input Bore (C Face)0.625Input Diameter (in)0.625Input Flange56CInput HP1.025Input HP @ 1750 RPM1.025Input Keyway (C Face)3/16 x 3/32Input RPM1750Input StyleQuillMax OHL (Output Shaft)860Max Thrust Load (Output Shaft)948Model CodeBMQ813Motor Frame Size56Mounting StyleBaseNo. of Gear ReductionsSingleOutputLeft & RightOutput Diameter (in)0.750Output HP0.933Output Key3/16 x 1.50Output RPM233Output Shaft Assembly CodeDOutput Shaft DirectionDoubleOutput Shaft OrientationLROutput StyleDOutput Torque252Output Torque Range250 to 500 in lbsOutput typeSolid ShaftOverhung Load700Paint/CoatingBlueProduct LineNH Series - Ironman Narrow Housing Worm Gear ReducersProduct TypeRight AngleRatio7.5 to 1Ratio Range7.5-1ReducerWorm - Right AngleReducer StyleWorm - Right AngleReducer TypeSingleSeriesNH Series - Ironman Narrow Housing Worm Gear ReducersSeries CodeNHSeries StyleNH-BMQ-DService Factor1Shaft Seal MaterialVitonSize56CTAP Depth0.5Thrust Rating - output shaft948
Specifications
| Assembly | BMQ-D |
| Center Distance | 1.3 In. |
| Center distance (in) | 1.33 |
| Center Distance Range | 1" thru 3.25" |
| Gear Drive Reductions | Single |
| Gear Type | Worm |
| H-Tap Size | 5/16 - 18 UNC |
| Housing material | Cast iron |
| HP Range | 1 to 1-1/2 (< 2) |
| Input Bore (C Face) | 0.625 |
| Input Diameter (in) | 0.625 |
| Input Flange | 56C |
| Input HP | 1.025 |
| Input HP @ 1750 RPM | 1.025 |
| Input Keyway (C Face) | 3/16 x 3/32 |
| Input RPM | 1750 |
| Input Style | Quill |
| Max OHL (Output Shaft) | 860 |
| Max Thrust Load (Output Shaft) | 948 |
| Model Code | BMQ813 |
| Motor Frame Size | 56 |
| Mounting Style | Base |
| No. of Gear Reductions | Single |
| Output | Left & Right |
| Output Diameter (in) | 0.750 |
| Output HP | 0.933 |
| Output Key | 3/16 x 1.50 |
| Output RPM | 233 |
| Output Shaft Assembly Code | D |
| Output Shaft Direction | Double |
| Output Shaft Orientation | LR |
| Output Style | D |
| Output Torque | 252 |
| Output Torque Range | 250 to 500 in lbs |
| Output type | Solid Shaft |
| Overhung Load | 700 |
| Paint/Coating | Blue |
| Product Line | NH Series - Ironman Narrow Housing Worm Gear Reducers |
| Product Type | Right Angle |
| Ratio | 7.5 to 1 |
| Ratio Range | 7.5-1 |
| Reducer | Worm - Right Angle |
| Reducer Style | Worm - Right Angle |
| Reducer Type | Single |
| Series | NH Series - Ironman Narrow Housing Worm Gear Reducers |
| Series Code | NH |
| Series Style | NH-BMQ-D |
| Service Factor | 1 |
| Shaft Seal Material | Viton |
| Size | 56C |
| TAP Depth | 0.5 |
| Thrust Rating - output shaft | 948 |
NH8130098.00