Grove Gear EL-H852-30-H-55 30:1 Ratio, 1.25" Input Diameter, 3.438" Output Diameter, Right Angle Aluminum Single-Reduction Worm
- Write a review
$8,853.78
AssemblyH-H1Bore Code55Center Distance5.2 In.Center distance (in)5.25Center Distance RangeAbove 3.25"Gear Drive ReductionsSingleGear TypeWormHousing materialAluminumHP Range10 HP (< 15)Input Diameter (in)1.25Input HP10.538Input RPM1750Input StyleSolid Input ShaftKeyway1/4 X 3.00Model CodeH852Mounting StyleShaft MountNo. of Gear ReductionsSingleOutputHollowOutput Diameter (in)3.438Output Hollow Shaft Diameter (in)3.438Output HP8.91Output Key7/8 X 11/16 X 4Output RPM58Output Shaft Assembly CodeH1Output Shaft OrientationH1Output StyleH1Output Torque9627Output Torque Range5000 to 10000 in lbsOutput typeHollow borePaint/CoatingAluminumProduct LineEL Series - Aluminum Worm Gear ReducersProduct TypeRight AngleRatio30 to 1Ratio Range30-1ReducerWorm - Right AngleReducer StyleWorm - Right AngleReducer TypeSingleSeriesEL Series - Aluminum Worm Gear ReducersSeries StyleEL-H-H1Service Factor1Shaft Seal MaterialViton
Specifications
| Assembly | H-H1 |
| Bore Code | 55 |
| Center Distance | 5.2 In. |
| Center distance (in) | 5.25 |
| Center Distance Range | Above 3.25" |
| Gear Drive Reductions | Single |
| Gear Type | Worm |
| Housing material | Aluminum |
| HP Range | 10 HP (< 15) |
| Input Diameter (in) | 1.25 |
| Input HP | 10.538 |
| Input RPM | 1750 |
| Input Style | Solid Input Shaft |
| Keyway | 1/4 X 3.00 |
| Model Code | H852 |
| Mounting Style | Shaft Mount |
| No. of Gear Reductions | Single |
| Output | Hollow |
| Output Diameter (in) | 3.438 |
| Output Hollow Shaft Diameter (in) | 3.438 |
| Output HP | 8.91 |
| Output Key | 7/8 X 11/16 X 4 |
| Output RPM | 58 |
| Output Shaft Assembly Code | H1 |
| Output Shaft Orientation | H1 |
| Output Style | H1 |
| Output Torque | 9627 |
| Output Torque Range | 5000 to 10000 in lbs |
| Output type | Hollow bore |
| Paint/Coating | Aluminum |
| Product Line | EL Series - Aluminum Worm Gear Reducers |
| Product Type | Right Angle |
| Ratio | 30 to 1 |
| Ratio Range | 30-1 |
| Reducer | Worm - Right Angle |
| Reducer Style | Worm - Right Angle |
| Reducer Type | Single |
| Series | EL Series - Aluminum Worm Gear Reducers |
| Series Style | EL-H-H1 |
| Service Factor | 1 |
| Shaft Seal Material | Viton |
EL8520507.55