Morse 175ULR60 XD1030 60:1 Ratio 1.75" Center Distance 0.625" Input Diameter Solid Shaft Input 0.875" Output Diameter Solid Shaf
- Write a review
$887.98
AssemblyU-LRCenter Distance (in)1.75 1.75Center Distance Range1" thru 3.25"Efficiency80Gear Ratio60:1Gear TypeWormH-Tap size5/16 - 18Housing MaterialCast IronHP Range1/3 HP or Less (< 1/2)Input Diameter (in)0.625Input HP @ 1750 RPM0.35Input Keyway3/16 X 1.50Input RPM1750Input Speed1750Input StyleSolid ShaftKey Length1.38Key Sq.0.188Model175UMounting TypeNo BaseNo. of Gear ReductionsSingleOutput Diameter (in)0.875Output Key3/16 X 1.38Output RPM29.1Output Shaft Assembly CodeDOutput Shaft DirectionDoubleOutput Shaft OrientationLROutput Torque Range500 to 1000 in lbsOutput Torque Rating (in-lb)623 in-lbs @1750 input RPMOutput TypeSolid ShaftOverhung Load Rating (Output Shaft(lb))740Product TypeWorm Speed ReducerRatio Range60:1ReducerWorm - Right AngleReducer StyleStandardSeries CodeRaiderService Factor1Shaft Seal MaterialNitrileTAP Depth0.61Thrust Rating - output shaft1399
Specifications
| Assembly | U-LR |
| Center Distance (in) | 1.75 1.75 |
| Center Distance Range | 1" thru 3.25" |
| Efficiency | 80 |
| Gear Ratio | 60:1 |
| Gear Type | Worm |
| H-Tap size | 5/16 - 18 |
| Housing Material | Cast Iron |
| HP Range | 1/3 HP or Less (< 1/2) |
| Input Diameter (in) | 0.625 |
| Input HP @ 1750 RPM | 0.35 |
| Input Keyway | 3/16 X 1.50 |
| Input RPM | 1750 |
| Input Speed | 1750 |
| Input Style | Solid Shaft |
| Key Length | 1.38 |
| Key Sq. | 0.188 |
| Model | 175U |
| Mounting Type | No Base |
| No. of Gear Reductions | Single |
| Output Diameter (in) | 0.875 |
| Output Key | 3/16 X 1.38 |
| Output RPM | 29.1 |
| Output Shaft Assembly Code | D |
| Output Shaft Direction | Double |
| Output Shaft Orientation | LR |
| Output Torque Range | 500 to 1000 in lbs |
| Output Torque Rating (in-lb) | 623 in-lbs @1750 input RPM |
| Output Type | Solid Shaft |
| Overhung Load Rating (Output Shaft(lb)) | 740 |
| Product Type | Worm Speed Reducer |
| Ratio Range | 60:1 |
| Reducer | Worm - Right Angle |
| Reducer Style | Standard |
| Series Code | Raider |
| Service Factor | 1 |
| Shaft Seal Material | Nitrile |
| TAP Depth | 0.61 |
| Thrust Rating - output shaft | 1399 |
XD1030