Grove Gear EL-B818-7.5-D 7.5:1 Ratio, 0.625" Input Diameter, 0.75" Output Diameter, Right Angle Aluminum Single-Reduction Worm R
- Write a review
$1,015.00
AssemblyB-DCenter Distance1.8 In.Center distance (in)1.75Center Distance Range1" thru 3.25"Gear Drive ReductionsSingleGear TypeWormH-Tap Size5/16-18Housing materialAluminumHP Range1 to 1-1/2 (< 2)Input Diameter (in)0.625Input HP1.909Input HP @ 1750 RPM1.909Input RPM1750Input StyleSolid Input ShaftMax OHL (Output Shaft)920Max Thrust Load (Output Shaft)868Model CodeB818Mounting StyleBaseNo. of Gear ReductionsSingleOutputLeft & RightOutput Diameter (in)0.750Output HP1.745Output Key3/16 x 1.38Output RPM233Output ShaftSolid ShaftOutput Shaft Assembly CodeDOutput Shaft DirectionDoubleOutput Shaft OrientationLROutput StyleDOutput Torque471Output Torque Range250 to 500 in lbsOutput typeSolid ShaftOverhung Load1200Paint/CoatingAluminumProduct LineEL Series - Aluminum Worm Gear ReducersProduct TypeRight AngleRatio7.5 to 1Ratio Range7.5-1ReducerWorm - Right AngleReducer StyleWorm - Right AngleReducer TypeSingleSeriesEL Series - Aluminum Worm Gear ReducersSeries CodeELSeries StyleEL-B-DService Factor1Shaft Seal MaterialVitonTAP Depth0.63Thrust Rating - output shaft868
Specifications
| Assembly | B-D |
| Center Distance | 1.8 In. |
| Center distance (in) | 1.75 |
| Center Distance Range | 1" thru 3.25" |
| Gear Drive Reductions | Single |
| Gear Type | Worm |
| H-Tap Size | 5/16-18 |
| Housing material | Aluminum |
| HP Range | 1 to 1-1/2 (< 2) |
| Input Diameter (in) | 0.625 |
| Input HP | 1.909 |
| Input HP @ 1750 RPM | 1.909 |
| Input RPM | 1750 |
| Input Style | Solid Input Shaft |
| Max OHL (Output Shaft) | 920 |
| Max Thrust Load (Output Shaft) | 868 |
| Model Code | B818 |
| Mounting Style | Base |
| No. of Gear Reductions | Single |
| Output | Left & Right |
| Output Diameter (in) | 0.750 |
| Output HP | 1.745 |
| Output Key | 3/16 x 1.38 |
| Output RPM | 233 |
| Output Shaft | Solid Shaft |
| Output Shaft Assembly Code | D |
| Output Shaft Direction | Double |
| Output Shaft Orientation | LR |
| Output Style | D |
| Output Torque | 471 |
| Output Torque Range | 250 to 500 in lbs |
| Output type | Solid Shaft |
| Overhung Load | 1200 |
| Paint/Coating | Aluminum |
| Product Line | EL Series - Aluminum Worm Gear Reducers |
| Product Type | Right Angle |
| Ratio | 7.5 to 1 |
| Ratio Range | 7.5-1 |
| Reducer | Worm - Right Angle |
| Reducer Style | Worm - Right Angle |
| Reducer Type | Single |
| Series | EL Series - Aluminum Worm Gear Reducers |
| Series Code | EL |
| Series Style | EL-B-D |
| Service Factor | 1 |
| Shaft Seal Material | Viton |
| TAP Depth | 0.63 |
| Thrust Rating - output shaft | 868 |
EL8180026.00