Pramet 200J07N-S90CN10N18 6760151 Disc Milling Cutter - Slotting
- Write a review
$2,249.75
Axial rake angle (GAMP)4Clamping Type Code (MTP)Screw clamping through holeConnection (shank) descriptionArbor DIN 8030 - disc millConnection bore diameter - millimeter (DCB)50Cutting depth maximum - millimeter (CDX)60Cutting diameter - inch (DC)7.874Cutting diameter - millimeter (DC)200Face effective cutting edge count (ZEFF)7Hand (Cutting direction)NeutralHub diameter - millimeter (DHUB)71Insert group used in the toolCNHQ 1005Insert index count (NOI)14Number of peripheral edges in the tool (ZNP)14Overall length - inch (OAL)0.709Overall length - millimeter (OAL)18Peripheral effective cutting edge count (ZEFP)14Possible useFinishingRadial rake angle (GAMF)-8Rotational speed maximum (RPMX)6100ShankShell mill DIN 8030 – disc mill
Specifications
| Axial rake angle (GAMP) | 4 |
| Clamping Type Code (MTP) | Screw clamping through hole |
| Connection (shank) description | Arbor DIN 8030 - disc mill |
| Connection bore diameter - millimeter (DCB) | 50 |
| Cutting depth maximum - millimeter (CDX) | 60 |
| Cutting diameter - inch (DC) | 7.874 |
| Cutting diameter - millimeter (DC) | 200 |
| Face effective cutting edge count (ZEFF) | 7 |
| Hand (Cutting direction) | Neutral |
| Hub diameter - millimeter (DHUB) | 71 |
| Insert group used in the tool | CNHQ 1005 |
| Insert index count (NOI) | 14 |
| Number of peripheral edges in the tool (ZNP) | 14 |
| Overall length - inch (OAL) | 0.709 |
| Overall length - millimeter (OAL) | 18 |
| Peripheral effective cutting edge count (ZEFP) | 14 |
| Possible use | Finishing |
| Radial rake angle (GAMF) | -8 |
| Rotational speed maximum (RPMX) | 6100 |
| Shank | Shell mill DIN 8030 – disc mill |
6760151