Grove Gear NH-BM852-10-D-210 10:1 Ratio, 1.25" Input Diameter, 2" Output Diameter, Right Angle Cast Iron Single-Reduction Worm R
- Write a review
$4,970.55
AssemblyBM-DCenter Distance5.2 In.Center distance (in)5.25Center Distance RangeAbove 3.25"Gear Drive ReductionsSingleGear TypeWormH-Tap Size5/8 - 11 UNCHousing materialCast ironHP Range20 HP (< 25)Input Bore (C Face)1.375Input Diameter (in)1.25Input Flange210TCInput HP23.15Input HP @ 1750 RPM23.15Input Keyway (C Face)5/16 x 5/32Input RPM1750Input Style3-Piece CoupledKeyway1/4 X 3.00Max OHL (Output Shaft)3370Max Thrust Load (Output Shaft)2449Model CodeBM852Motor Frame Size210Mounting StyleBaseNo. of Gear ReductionsSingleOutputLeft & RightOutput Diameter (in)2.000Output HP21.73Output Key1/2 x 2.50Output RPM175Output Shaft Assembly CodeDOutput Shaft DirectionDoubleOutput Shaft OrientationLROutput StyleDOutput Torque7827Output Torque Range5000 to 10000 in lbsOutput typeSolid ShaftOverhung Load3370Paint/CoatingBlueProduct LineNH Series - Ironman Narrow Housing Worm Gear ReducersProduct TypeRight AngleRatio10 to 1Ratio Range10-1ReducerWorm - Right AngleReducer StyleWorm - Right AngleReducer TypeSingleSeriesNH Series - Ironman Narrow Housing Worm Gear ReducersSeries CodeNHSeries StyleNH-BM-DService Factor1Shaft Seal MaterialVitonSize210TCTAP Depth1.25Thrust Rating - output shaft2449
Specifications
| Assembly | BM-D |
| Center Distance | 5.2 In. |
| Center distance (in) | 5.25 |
| Center Distance Range | Above 3.25" |
| Gear Drive Reductions | Single |
| Gear Type | Worm |
| H-Tap Size | 5/8 - 11 UNC |
| Housing material | Cast iron |
| HP Range | 20 HP (< 25) |
| Input Bore (C Face) | 1.375 |
| Input Diameter (in) | 1.25 |
| Input Flange | 210TC |
| Input HP | 23.15 |
| Input HP @ 1750 RPM | 23.15 |
| Input Keyway (C Face) | 5/16 x 5/32 |
| Input RPM | 1750 |
| Input Style | 3-Piece Coupled |
| Keyway | 1/4 X 3.00 |
| Max OHL (Output Shaft) | 3370 |
| Max Thrust Load (Output Shaft) | 2449 |
| Model Code | BM852 |
| Motor Frame Size | 210 |
| Mounting Style | Base |
| No. of Gear Reductions | Single |
| Output | Left & Right |
| Output Diameter (in) | 2.000 |
| Output HP | 21.73 |
| Output Key | 1/2 x 2.50 |
| Output RPM | 175 |
| Output Shaft Assembly Code | D |
| Output Shaft Direction | Double |
| Output Shaft Orientation | LR |
| Output Style | D |
| Output Torque | 7827 |
| Output Torque Range | 5000 to 10000 in lbs |
| Output type | Solid Shaft |
| Overhung Load | 3370 |
| Paint/Coating | Blue |
| Product Line | NH Series - Ironman Narrow Housing Worm Gear Reducers |
| Product Type | Right Angle |
| Ratio | 10 to 1 |
| Ratio Range | 10-1 |
| Reducer | Worm - Right Angle |
| Reducer Style | Worm - Right Angle |
| Reducer Type | Single |
| Series | NH Series - Ironman Narrow Housing Worm Gear Reducers |
| Series Code | NH |
| Series Style | NH-BM-D |
| Service Factor | 1 |
| Shaft Seal Material | Viton |
| Size | 210TC |
| TAP Depth | 1.25 |
| Thrust Rating - output shaft | 2449 |
NH8520057.00