Morse 300Q180L30 XH1187 30:1 Ratio 3" Center Distance 1.125" Input Bore (C Face) 1.125" Input Diameter C-Face Quill Input 1.25"
- Write a review
$1,977.15
AssemblyQ-LCenter Distance (in)3 3Center Distance Range1" thru 3.25"Efficiency80Frame Size180TCGear Ratio30:1Gear TypeWormH-Tap size7/16 - 14Housing MaterialCast IronHP Range2HP (< 3)Input Bore (C Face)1.125Input Diameter (in)1.125Input HP @ 1750 RPM2.63Input Keyway (C Face)1/4 X 1/8Input RPM1750Input Speed1750Input StyleC-Face QuillModel300QMounting TypeNo BaseNo. of Gear ReductionsSingleOutput Diameter (in)1.25Output Key1/4 X 2.25Output RPM58.3Output Shaft Assembly CodeLOutput Shaft DirectionLeftOutput Torque Range2500 to 5000 in lbsOutput Torque Rating (in-lb)2519 in-lbs @1750 input RPMOutput TypeSolid ShaftOverhung Load Rating (Output Shaft(lb))987Product TypeWorm Speed ReducerRatio Range30:1ReducerWorm - Right AngleReducer StyleStandardSeries CodeRaiderService Factor1Shaft Seal MaterialNitrileTAP Depth0.8Thrust Rating - output shaft3410
Specifications
| Assembly | Q-L |
| Center Distance (in) | 3 3 |
| Center Distance Range | 1" thru 3.25" |
| Efficiency | 80 |
| Frame Size | 180TC |
| Gear Ratio | 30:1 |
| Gear Type | Worm |
| H-Tap size | 7/16 - 14 |
| Housing Material | Cast Iron |
| HP Range | 2HP (< 3) |
| Input Bore (C Face) | 1.125 |
| Input Diameter (in) | 1.125 |
| Input HP @ 1750 RPM | 2.63 |
| Input Keyway (C Face) | 1/4 X 1/8 |
| Input RPM | 1750 |
| Input Speed | 1750 |
| Input Style | C-Face Quill |
| Model | 300Q |
| Mounting Type | No Base |
| No. of Gear Reductions | Single |
| Output Diameter (in) | 1.25 |
| Output Key | 1/4 X 2.25 |
| Output RPM | 58.3 |
| Output Shaft Assembly Code | L |
| Output Shaft Direction | Left |
| Output Torque Range | 2500 to 5000 in lbs |
| Output Torque Rating (in-lb) | 2519 in-lbs @1750 input RPM |
| Output Type | Solid Shaft |
| Overhung Load Rating (Output Shaft(lb)) | 987 |
| Product Type | Worm Speed Reducer |
| Ratio Range | 30:1 |
| Reducer | Worm - Right Angle |
| Reducer Style | Standard |
| Series Code | Raider |
| Service Factor | 1 |
| Shaft Seal Material | Nitrile |
| TAP Depth | 0.8 |
| Thrust Rating - output shaft | 3410 |
XH1187