Grove Gear GRG-BMQ832-7.5-D-180 7.5:1 Ratio, 1.125" Input Diameter, 1.5" Output Diameter, Right Angle Cast Iron Single-Reduction
- Write a review
$1,950.82
AssemblyBMQ-DCenter Distance3.2 In.Center distance (in)3.25Center Distance Range1" thru 3.25"Gear Drive ReductionsSingleGear TypeWormH-Tap Size7/16-14 UNCHousing materialCast ironHP Range7-1/2 (< 10)Input Bore (C Face)1.125Input Diameter (in)1.125Input Flange180TCInput HP8.863Input HP @ 1750 RPM8.863Input Keyway (C Face)1/4 x 1/8Input RPM1750Input StyleQuillMax OHL (Output Shaft)2275Max Thrust Load (Output Shaft)1869Model CodeBMQ832Motor Frame Size180Mounting StyleBaseNo. of Gear ReductionsSingleOutputLeft & RightOutput Diameter (in)1.500Output HP8.264Output Key3/8 x 2.63Output RPM233Output Shaft Assembly CodeDOutput Shaft DirectionDoubleOutput Shaft OrientationLROutput StyleDOutput Torque2232Output Torque Range1000 to 2500 in lbsOutput typeSolid ShaftOverhung Load2275Paint/CoatingBlueProduct LineGRG Series - Ironman Worm Gear ReducersProduct TypeRight AngleRatio7.5 to 1Ratio Range7.5-1ReducerWorm - Right AngleReducer StyleWorm - Right AngleReducer TypeSingleSeriesGRG Series - Ironman Worm Gear ReducersSeries CodeGRGSeries StyleGRG-BMQ-DService Factor1Shaft Seal MaterialVitonSize180TCTAP Depth0.88Thrust Rating - output shaft1869
Specifications
| Assembly | BMQ-D |
| Center Distance | 3.2 In. |
| Center distance (in) | 3.25 |
| Center Distance Range | 1" thru 3.25" |
| Gear Drive Reductions | Single |
| Gear Type | Worm |
| H-Tap Size | 7/16-14 UNC |
| Housing material | Cast iron |
| HP Range | 7-1/2 (< 10) |
| Input Bore (C Face) | 1.125 |
| Input Diameter (in) | 1.125 |
| Input Flange | 180TC |
| Input HP | 8.863 |
| Input HP @ 1750 RPM | 8.863 |
| Input Keyway (C Face) | 1/4 x 1/8 |
| Input RPM | 1750 |
| Input Style | Quill |
| Max OHL (Output Shaft) | 2275 |
| Max Thrust Load (Output Shaft) | 1869 |
| Model Code | BMQ832 |
| Motor Frame Size | 180 |
| Mounting Style | Base |
| No. of Gear Reductions | Single |
| Output | Left & Right |
| Output Diameter (in) | 1.500 |
| Output HP | 8.264 |
| Output Key | 3/8 x 2.63 |
| Output RPM | 233 |
| Output Shaft Assembly Code | D |
| Output Shaft Direction | Double |
| Output Shaft Orientation | LR |
| Output Style | D |
| Output Torque | 2232 |
| Output Torque Range | 1000 to 2500 in lbs |
| Output type | Solid Shaft |
| Overhung Load | 2275 |
| Paint/Coating | Blue |
| Product Line | GRG Series - Ironman Worm Gear Reducers |
| Product Type | Right Angle |
| Ratio | 7.5 to 1 |
| Ratio Range | 7.5-1 |
| Reducer | Worm - Right Angle |
| Reducer Style | Worm - Right Angle |
| Reducer Type | Single |
| Series | GRG Series - Ironman Worm Gear Reducers |
| Series Code | GRG |
| Series Style | GRG-BMQ-D |
| Service Factor | 1 |
| Shaft Seal Material | Viton |
| Size | 180TC |
| TAP Depth | 0.88 |
| Thrust Rating - output shaft | 1869 |
GRG8320286.00