Grove Gear NH-B830-50-D 50:1 Ratio, 0.875" Input Diameter, 1.25" Output Diameter, Right Angle Cast Iron Single-Reduction Worm Re
- Write a review
$1,500.58
AssemblyB-DCenter Distance3 In.Center distance (in)3.00Center Distance Range1" thru 3.25"Gear Drive ReductionsSingleGear TypeWormH-Tap Size3/8 - 16 UNCHousing materialCast ironHP Range1 to 1-1/2 (< 2)Input Diameter (in)0.875Input HP1.915Input HP @ 1750 RPM1.535Input RPM1750Input StyleSolid Input ShaftKeyway3/16 X 1.63Max OHL (Output Shaft)1950Max Thrust Load (Output Shaft)2574Model CodeB830Mounting StyleBaseNo. of Gear ReductionsSingleOutputLeft & RightOutput Diameter (in)1.250Output HP1.383Output Key1/4 x 1.75Output RPM35Output ShaftSolid ShaftOutput Shaft Assembly CodeDOutput Shaft DirectionDoubleOutput Shaft OrientationLROutput StyleDOutput Torque2026Output Torque Range1000 to 2500 in lbsOutput typeSolid ShaftOverhung Load2170Paint/CoatingBlueProduct LineNH Series - Ironman Narrow Housing Worm Gear ReducersProduct TypeRight AngleRatio50 to 1Ratio Range50-1ReducerWorm - Right AngleReducer StyleWorm - Right AngleReducer TypeSingleSeriesNH Series - Ironman Narrow Housing Worm Gear ReducersSeries CodeNHSeries StyleNH-B-DService Factor1Shaft Seal MaterialVitonTAP Depth0.75Thrust Rating - output shaft2574
Specifications
| Assembly | B-D |
| Center Distance | 3 In. |
| Center distance (in) | 3.00 |
| Center Distance Range | 1" thru 3.25" |
| Gear Drive Reductions | Single |
| Gear Type | Worm |
| H-Tap Size | 3/8 - 16 UNC |
| Housing material | Cast iron |
| HP Range | 1 to 1-1/2 (< 2) |
| Input Diameter (in) | 0.875 |
| Input HP | 1.915 |
| Input HP @ 1750 RPM | 1.535 |
| Input RPM | 1750 |
| Input Style | Solid Input Shaft |
| Keyway | 3/16 X 1.63 |
| Max OHL (Output Shaft) | 1950 |
| Max Thrust Load (Output Shaft) | 2574 |
| Model Code | B830 |
| Mounting Style | Base |
| No. of Gear Reductions | Single |
| Output | Left & Right |
| Output Diameter (in) | 1.250 |
| Output HP | 1.383 |
| Output Key | 1/4 x 1.75 |
| Output RPM | 35 |
| Output Shaft | Solid Shaft |
| Output Shaft Assembly Code | D |
| Output Shaft Direction | Double |
| Output Shaft Orientation | LR |
| Output Style | D |
| Output Torque | 2026 |
| Output Torque Range | 1000 to 2500 in lbs |
| Output type | Solid Shaft |
| Overhung Load | 2170 |
| Paint/Coating | Blue |
| Product Line | NH Series - Ironman Narrow Housing Worm Gear Reducers |
| Product Type | Right Angle |
| Ratio | 50 to 1 |
| Ratio Range | 50-1 |
| Reducer | Worm - Right Angle |
| Reducer Style | Worm - Right Angle |
| Reducer Type | Single |
| Series | NH Series - Ironman Narrow Housing Worm Gear Reducers |
| Series Code | NH |
| Series Style | NH-B-D |
| Service Factor | 1 |
| Shaft Seal Material | Viton |
| TAP Depth | 0.75 |
| Thrust Rating - output shaft | 2574 |
NH8300033.00