Grove Gear EL-B821-40-D 40:1 Ratio, 0.625" Input Diameter, 1" Output Diameter, Right Angle Aluminum Single-Reduction Worm Reduce
- Write a review
$1,159.01
AssemblyB-DCenter Distance2.1 In.Center distance (in)2.06Center Distance Range1" thru 3.25"Gear Drive ReductionsSingleGear TypeWormH-Tap Size3/8-16Housing materialAluminumHP Range1/2 to 3/4 HP (< 1)Input Diameter (in)0.625Input HP0.916Input HP @ 1750 RPM0.916Input RPM1750Input StyleSolid Input ShaftKeyway3/16 X 1.38Max OHL (Output Shaft)1315Max Thrust Load (Output Shaft)1144Model CodeB821Mounting StyleBaseNo. of Gear ReductionsSingleOutputLeft & RightOutput Diameter (in)1.000Output HP0.674Output Key1/4 x 1.44Output RPM43Output ShaftSolid ShaftOutput Shaft Assembly CodeDOutput Shaft DirectionDoubleOutput Shaft OrientationLROutput StyleDOutput Torque971Output Torque Range500 to 1000 in lbsOutput typeSolid ShaftOverhung Load1315Paint/CoatingAluminumProduct LineEL Series - Aluminum Worm Gear ReducersProduct TypeRight AngleRatio40 to 1Ratio Range40-1ReducerWorm - Right AngleReducer StyleWorm - Right AngleReducer TypeSingleSeriesEL Series - Aluminum Worm Gear ReducersSeries CodeELSeries StyleEL-B-DService Factor1Shaft Seal MaterialVitonTAP Depth0.87Thrust Rating - output shaft1144
Specifications
| Assembly | B-D |
| Center Distance | 2.1 In. |
| Center distance (in) | 2.06 |
| Center Distance Range | 1" thru 3.25" |
| Gear Drive Reductions | Single |
| Gear Type | Worm |
| H-Tap Size | 3/8-16 |
| Housing material | Aluminum |
| HP Range | 1/2 to 3/4 HP (< 1) |
| Input Diameter (in) | 0.625 |
| Input HP | 0.916 |
| Input HP @ 1750 RPM | 0.916 |
| Input RPM | 1750 |
| Input Style | Solid Input Shaft |
| Keyway | 3/16 X 1.38 |
| Max OHL (Output Shaft) | 1315 |
| Max Thrust Load (Output Shaft) | 1144 |
| Model Code | B821 |
| Mounting Style | Base |
| No. of Gear Reductions | Single |
| Output | Left & Right |
| Output Diameter (in) | 1.000 |
| Output HP | 0.674 |
| Output Key | 1/4 x 1.44 |
| Output RPM | 43 |
| Output Shaft | Solid Shaft |
| Output Shaft Assembly Code | D |
| Output Shaft Direction | Double |
| Output Shaft Orientation | LR |
| Output Style | D |
| Output Torque | 971 |
| Output Torque Range | 500 to 1000 in lbs |
| Output type | Solid Shaft |
| Overhung Load | 1315 |
| Paint/Coating | Aluminum |
| Product Line | EL Series - Aluminum Worm Gear Reducers |
| Product Type | Right Angle |
| Ratio | 40 to 1 |
| Ratio Range | 40-1 |
| Reducer | Worm - Right Angle |
| Reducer Style | Worm - Right Angle |
| Reducer Type | Single |
| Series | EL Series - Aluminum Worm Gear Reducers |
| Series Code | EL |
| Series Style | EL-B-D |
| Service Factor | 1 |
| Shaft Seal Material | Viton |
| TAP Depth | 0.87 |
| Thrust Rating - output shaft | 1144 |
EL8210032.00