Morse 133Q56L20 XB1065 20:1 Ratio 1.33" Center Distance 0.625" Input Bore (C Face) 0.625" Input Diameter C-Face Quill Input 0.62
- Write a review
$754.85
AssemblyQ-LCenter Distance (in)1.33 1.33Center Distance Range1" thru 3.25"Efficiency80Frame Size56CGear Ratio20:1Gear TypeWormH-Tap size5/16 - 18Housing MaterialCast IronHP Range1/2 to 3/4 HP (< 1)Input Bore (C Face)0.625Input Diameter (in)0.625Input HP @ 1750 RPM0.46Input Keyway (C Face)3/16 X 3/32Input RPM1750Input Speed1750Input StyleC-Face QuillModel133QMounting TypeNo BaseNo. of Gear ReductionsSingleOutput Diameter (in)0.625Output Key3/16 X 1.31Output RPM87.5Output Shaft Assembly CodeLOutput Shaft DirectionLeftOutput Torque Range250 to 500 in lbsOutput Torque Rating (in-lb)320 in-lbs @1750 input RPMOutput TypeSolid ShaftOverhung Load Rating (Output Shaft(lb))458Product TypeWorm Speed ReducerRatio Range20:1ReducerWorm - Right AngleReducer StyleStandardSeries CodeRaiderService Factor1Shaft Seal MaterialNitrileTAP Depth0.5Thrust Rating - output shaft1241
Specifications
| Assembly | Q-L |
| Center Distance (in) | 1.33 1.33 |
| Center Distance Range | 1" thru 3.25" |
| Efficiency | 80 |
| Frame Size | 56C |
| Gear Ratio | 20:1 |
| Gear Type | Worm |
| H-Tap size | 5/16 - 18 |
| Housing Material | Cast Iron |
| HP Range | 1/2 to 3/4 HP (< 1) |
| Input Bore (C Face) | 0.625 |
| Input Diameter (in) | 0.625 |
| Input HP @ 1750 RPM | 0.46 |
| Input Keyway (C Face) | 3/16 X 3/32 |
| Input RPM | 1750 |
| Input Speed | 1750 |
| Input Style | C-Face Quill |
| Model | 133Q |
| Mounting Type | No Base |
| No. of Gear Reductions | Single |
| Output Diameter (in) | 0.625 |
| Output Key | 3/16 X 1.31 |
| Output RPM | 87.5 |
| Output Shaft Assembly Code | L |
| Output Shaft Direction | Left |
| Output Torque Range | 250 to 500 in lbs |
| Output Torque Rating (in-lb) | 320 in-lbs @1750 input RPM |
| Output Type | Solid Shaft |
| Overhung Load Rating (Output Shaft(lb)) | 458 |
| Product Type | Worm Speed Reducer |
| Ratio Range | 20:1 |
| Reducer | Worm - Right Angle |
| Reducer Style | Standard |
| Series Code | Raider |
| Service Factor | 1 |
| Shaft Seal Material | Nitrile |
| TAP Depth | 0.5 |
| Thrust Rating - output shaft | 1241 |
XB1065