Grove Gear EL-B813-20-D 20:1 Ratio, 0.5" Input Diameter, 0.625" Output Diameter, Right Angle Aluminum Single-Reduction Worm Redu
- Write a review
$903.53
AssemblyB-DCenter Distance1.3 In.Center distance (in)1.33Center Distance Range1" thru 3.25"Gear Drive ReductionsSingleGear TypeWormH-Tap Size5/16-18Housing materialAluminumHP Range1/2 to 3/4 HP (< 1)Input Diameter (in)0.5Input HP0.551Input HP @ 1750 RPM0.551Input RPM1750Input StyleSolid Input ShaftKeyway1/8 X 1.00Max OHL (Output Shaft)700Max Thrust Load (Output Shaft)1144Model CodeB813Mounting StyleBaseNo. of Gear ReductionsSingleOutputLeft & RightOutput Diameter (in)0.625Output HP0.445Output Key3/16 x 1.38Output RPM87Output ShaftSolid ShaftOutput Shaft Assembly CodeDOutput Shaft DirectionDoubleOutput Shaft OrientationLROutput StyleDOutput Torque320Output Torque Range250 to 500 in lbsOutput typeSolid ShaftOverhung Load700Paint/CoatingAluminumProduct LineEL Series - Aluminum Worm Gear ReducersProduct TypeRight AngleRatio20 to 1Ratio Range20-1ReducerWorm - Right AngleReducer StyleWorm - Right AngleReducer TypeSingleSeriesEL Series - Aluminum Worm Gear ReducersSeries CodeELSeries StyleEL-B-DService Factor1Shaft Seal MaterialVitonTAP Depth0.5Thrust Rating - output shaft1144
Specifications
| Assembly | B-D |
| Center Distance | 1.3 In. |
| Center distance (in) | 1.33 |
| Center Distance Range | 1" thru 3.25" |
| Gear Drive Reductions | Single |
| Gear Type | Worm |
| H-Tap Size | 5/16-18 |
| Housing material | Aluminum |
| HP Range | 1/2 to 3/4 HP (< 1) |
| Input Diameter (in) | 0.5 |
| Input HP | 0.551 |
| Input HP @ 1750 RPM | 0.551 |
| Input RPM | 1750 |
| Input Style | Solid Input Shaft |
| Keyway | 1/8 X 1.00 |
| Max OHL (Output Shaft) | 700 |
| Max Thrust Load (Output Shaft) | 1144 |
| Model Code | B813 |
| Mounting Style | Base |
| No. of Gear Reductions | Single |
| Output | Left & Right |
| Output Diameter (in) | 0.625 |
| Output HP | 0.445 |
| Output Key | 3/16 x 1.38 |
| Output RPM | 87 |
| Output Shaft | Solid Shaft |
| Output Shaft Assembly Code | D |
| Output Shaft Direction | Double |
| Output Shaft Orientation | LR |
| Output Style | D |
| Output Torque | 320 |
| Output Torque Range | 250 to 500 in lbs |
| Output type | Solid Shaft |
| Overhung Load | 700 |
| Paint/Coating | Aluminum |
| Product Line | EL Series - Aluminum Worm Gear Reducers |
| Product Type | Right Angle |
| Ratio | 20 to 1 |
| Ratio Range | 20-1 |
| Reducer | Worm - Right Angle |
| Reducer Style | Worm - Right Angle |
| Reducer Type | Single |
| Series | EL Series - Aluminum Worm Gear Reducers |
| Series Code | EL |
| Series Style | EL-B-D |
| Service Factor | 1 |
| Shaft Seal Material | Viton |
| TAP Depth | 0.5 |
| Thrust Rating - output shaft | 1144 |
EL8130029.00