Grove Gear NH-H830-10-H1-31 10:1 Ratio, 0.875" Input Diameter, 1.9375" Output Diameter, Right Angle Cast Iron Single-Reduction W
- Write a review
$1,963.62
AssemblyH-H1Bore Code31Center Distance3 In.Center distance (in)3Center Distance Range1" thru 3.25"Gear Drive ReductionsSingleGear TypeWormHousing materialCast ironHP Range5HP (< 7-1/2)Input Diameter (in)0.875Input HP6.151Input HP @ 1750 RPM5.45Input RPM1750Input StyleSolid Input ShaftKeyway3/16 X 1.63Max OHL (Output Shaft)1950Max Thrust Load (Output Shaft)2147Model CodeH830Mounting StyleShaft MountNo. of Gear ReductionsSingleOutputHollowOutput Diameter (in)1.9375Output Hollow Shaft Diameter (in)1.938Output HP5.655Output Key1/2 X 4.00Output RPM175Output Shaft Assembly CodeH1Output Shaft DirectionH1Output Shaft OrientationH1Output StyleH1Output Torque1802Output Torque Range1000 to 2500 in lbsOutput typeHollow boreOverhung Load Rating (Output Shaft(lb))1950Paint/CoatingBlueProduct LineNH Series - Ironman Narrow Housing Worm Gear ReducersProduct TypeRight AngleRatio10 to 1Ratio Range10-1ReducerWorm - Right AngleReducer StyleWorm - Right AngleReducer TypeSingleSeriesNH Series - Ironman Narrow Housing Worm Gear ReducersSeries CodeNHSeries StyleNH-H-H1Service Factor1Shaft Seal MaterialVitonThrust Rating - output shaft2147
Specifications
| Assembly | H-H1 |
| Bore Code | 31 |
| Center Distance | 3 In. |
| Center distance (in) | 3 |
| Center Distance Range | 1" thru 3.25" |
| Gear Drive Reductions | Single |
| Gear Type | Worm |
| Housing material | Cast iron |
| HP Range | 5HP (< 7-1/2) |
| Input Diameter (in) | 0.875 |
| Input HP | 6.151 |
| Input HP @ 1750 RPM | 5.45 |
| Input RPM | 1750 |
| Input Style | Solid Input Shaft |
| Keyway | 3/16 X 1.63 |
| Max OHL (Output Shaft) | 1950 |
| Max Thrust Load (Output Shaft) | 2147 |
| Model Code | H830 |
| Mounting Style | Shaft Mount |
| No. of Gear Reductions | Single |
| Output | Hollow |
| Output Diameter (in) | 1.9375 |
| Output Hollow Shaft Diameter (in) | 1.938 |
| Output HP | 5.655 |
| Output Key | 1/2 X 4.00 |
| Output RPM | 175 |
| Output Shaft Assembly Code | H1 |
| Output Shaft Direction | H1 |
| Output Shaft Orientation | H1 |
| Output Style | H1 |
| Output Torque | 1802 |
| Output Torque Range | 1000 to 2500 in lbs |
| Output type | Hollow bore |
| Overhung Load Rating (Output Shaft(lb)) | 1950 |
| Paint/Coating | Blue |
| Product Line | NH Series - Ironman Narrow Housing Worm Gear Reducers |
| Product Type | Right Angle |
| Ratio | 10 to 1 |
| Ratio Range | 10-1 |
| Reducer | Worm - Right Angle |
| Reducer Style | Worm - Right Angle |
| Reducer Type | Single |
| Series | NH Series - Ironman Narrow Housing Worm Gear Reducers |
| Series Code | NH |
| Series Style | NH-H-H1 |
| Service Factor | 1 |
| Shaft Seal Material | Viton |
| Thrust Rating - output shaft | 2147 |
NH8300503.31