Morse 300UL30 XH1007 30:1 Ratio 3" Center Distance 0.875" Input Diameter Solid Shaft Input 1.25" Output Diameter Solid Shaft Out
- Write a review
$1,774.43
AssemblyU-LCenter Distance (in)3 3Center Distance Range1" thru 3.25"Efficiency80Gear Ratio30:1Gear TypeWormH-Tap size7/16 - 14Housing MaterialCast IronHP Range2HP (< 3)Input Diameter (in)0.875Input HP @ 1750 RPM2.63Input Keyway3/16 X 1.31Input RPM1750Input Speed1750Input StyleSolid ShaftKey Length1.31Key Sq.0.188Model300UMounting TypeNo BaseNo. of Gear ReductionsSingleOutput Diameter (in)1.25Output Key1/4 X 2.25Output RPM58.3Output Shaft Assembly CodeLOutput Shaft DirectionLeftOutput Torque Range1000 to 2500 in lbsOutput Torque Rating (in-lb)2519 in-lbs @1750 input RPMOutput TypeSolid ShaftOverhung Load Rating (Output Shaft(lb))987Product TypeWorm Speed ReducerRatio Range30:1ReducerWorm - Right AngleReducer StyleStandardSeries CodeRaiderService Factor1Shaft Seal MaterialNitrileTAP Depth0.8Thrust Rating - output shaft3410
Specifications
| Assembly | U-L |
| Center Distance (in) | 3 3 |
| Center Distance Range | 1" thru 3.25" |
| Efficiency | 80 |
| Gear Ratio | 30:1 |
| Gear Type | Worm |
| H-Tap size | 7/16 - 14 |
| Housing Material | Cast Iron |
| HP Range | 2HP (< 3) |
| Input Diameter (in) | 0.875 |
| Input HP @ 1750 RPM | 2.63 |
| Input Keyway | 3/16 X 1.31 |
| Input RPM | 1750 |
| Input Speed | 1750 |
| Input Style | Solid Shaft |
| Key Length | 1.31 |
| Key Sq. | 0.188 |
| Model | 300U |
| Mounting Type | No Base |
| No. of Gear Reductions | Single |
| Output Diameter (in) | 1.25 |
| Output Key | 1/4 X 2.25 |
| Output RPM | 58.3 |
| Output Shaft Assembly Code | L |
| Output Shaft Direction | Left |
| Output Torque Range | 1000 to 2500 in lbs |
| Output Torque Rating (in-lb) | 2519 in-lbs @1750 input RPM |
| Output Type | Solid Shaft |
| Overhung Load Rating (Output Shaft(lb)) | 987 |
| Product Type | Worm Speed Reducer |
| Ratio Range | 30:1 |
| Reducer | Worm - Right Angle |
| Reducer Style | Standard |
| Series Code | Raider |
| Service Factor | 1 |
| Shaft Seal Material | Nitrile |
| TAP Depth | 0.8 |
| Thrust Rating - output shaft | 3410 |
XH1007
