Dodge 23A40LR14WP 40:1 Ratio Double Solid Output Shaft 140TC Flange 2.3" Center Distance White PaintRatio: 40:1Center Distance:
- Write a review
$1,511.87
Base to output center height2.5000 in, 63.5 mmCase size23Center distance (in)2.3 in, Center distance (in):2.3100 in, 58.674 mmCenter to end of shaft distance5.1400 in, 130.556 mmFinishWhite epoxyHorsepower rating input1.1100 hp, 0.828 kWHorsepower rating output0.8300 hp, 0.619 kWHousing materialCast ironInput140TC flangeInput flange140TCInput HP1.11Input style3-Piece coupledLubrication typePAG, standard temperatureMotor compatibilityNEMA motor, 140TC frameMounting bolt pattern length5.0000 in, 127.0 mmMounting bolt pattern width2.8800 in, 73.152 mmNominal ratio40OutputDouble solid output shaftOutput bore/shaft diameter1.25 inOutput horse power0.83Output shaft center to input motor mounting face distance8.5800 in, 217.932 mmOutput styleLeft, rightOverhung load1610 lbf, 7161.637 NPaint typeWhite epoxyPaint/coatingWhiteRated torque output1193 in/lb, 1193.0 in/lbRatio40 to 1Seal typeSingle-lip contactShaft diameter output1.1250 in, 28.575 mmShaft length output2.1800 in, 55.372 mmSuitable for washdownNoThermal horsepower rating1.7300 hp, 1.29 kW
Specifications
| Base to output center height | 2.5000 in, 63.5 mm |
| Case size | 23 |
| Center distance (in) | 2.3 in, Center distance (in):2.3100 in, 58.674 mm |
| Center to end of shaft distance | 5.1400 in, 130.556 mm |
| Finish | White epoxy |
| Horsepower rating input | 1.1100 hp, 0.828 kW |
| Horsepower rating output | 0.8300 hp, 0.619 kW |
| Housing material | Cast iron |
| Input | 140TC flange |
| Input flange | 140TC |
| Input HP | 1.11 |
| Input style | 3-Piece coupled |
| Lubrication type | PAG, standard temperature |
| Motor compatibility | NEMA motor, 140TC frame |
| Mounting bolt pattern length | 5.0000 in, 127.0 mm |
| Mounting bolt pattern width | 2.8800 in, 73.152 mm |
| Nominal ratio | 40 |
| Output | Double solid output shaft |
| Output bore/shaft diameter | 1.25 in |
| Output horse power | 0.83 |
| Output shaft center to input motor mounting face distance | 8.5800 in, 217.932 mm |
| Output style | Left, right |
| Overhung load | 1610 lbf, 7161.637 N |
| Paint type | White epoxy |
| Paint/coating | White |
| Rated torque output | 1193 in/lb, 1193.0 in/lb |
| Ratio | 40 to 1 |
| Seal type | Single-lip contact |
| Shaft diameter output | 1.1250 in, 28.575 mm |
| Shaft length output | 2.1800 in, 55.372 mm |
| Suitable for washdown | No |
| Thermal horsepower rating | 1.7300 hp, 1.29 kW |
23A40LR14WP