Dodge 23S40H 40:1 Ratio Hollow Bore 0.875" Input Shaft 2.3" Center Distance Green PaintRatio: 40:1Center Distance: 2.3"Input: 0.
- Write a review
$1,324.70
Base to output center height2.5000 in, 63.5 mmBore dia output1.4380 in, 36.525 mmBore length6.6200 in, 168.148 mmCase size23Center distance (in)2.3 in, Center distance (in):2.3100 in, 58.674 mmFinishGreenHorsepower rating input1.1100 hp, 0.828 kWHorsepower rating output0.8300 hp, 0.619 kWHousing materialCast ironInput0.875 in Input ShaftInput HP1.11Input styleSeparate, Input style:Solid input shaftLubrication typePAG, standard temperatureMounting bolt pattern length5.0000 in, 127.0 mmMounting bolt pattern width2.8800 in, 73.152 mmNominal ratio40OutputHollow boreOutput bore/shaft diameter1.4375 inOutput horse power0.83Output shaftHollowOutput styleHollowOverhung load1610 lbf, 7161.637 NPaint typeStandardPaint/coatingGreenRated torque output1193 in/lb, 1193.0 in/lbRatio40 to 1Seal typeSingle-lip contactShaft dia input0.8750 inShaft length input1.1700 in, 29.718 mmSuitable for washdownNoThermal horsepower rating1.7300 hp, 1.29 kW
Specifications
| Base to output center height | 2.5000 in, 63.5 mm |
| Bore dia output | 1.4380 in, 36.525 mm |
| Bore length | 6.6200 in, 168.148 mm |
| Case size | 23 |
| Center distance (in) | 2.3 in, Center distance (in):2.3100 in, 58.674 mm |
| Finish | Green |
| Horsepower rating input | 1.1100 hp, 0.828 kW |
| Horsepower rating output | 0.8300 hp, 0.619 kW |
| Housing material | Cast iron |
| Input | 0.875 in Input Shaft |
| Input HP | 1.11 |
| Input style | Separate, Input style:Solid input shaft |
| Lubrication type | PAG, standard temperature |
| Mounting bolt pattern length | 5.0000 in, 127.0 mm |
| Mounting bolt pattern width | 2.8800 in, 73.152 mm |
| Nominal ratio | 40 |
| Output | Hollow bore |
| Output bore/shaft diameter | 1.4375 in |
| Output horse power | 0.83 |
| Output shaft | Hollow |
| Output style | Hollow |
| Overhung load | 1610 lbf, 7161.637 N |
| Paint type | Standard |
| Paint/coating | Green |
| Rated torque output | 1193 in/lb, 1193.0 in/lb |
| Ratio | 40 to 1 |
| Seal type | Single-lip contact |
| Shaft dia input | 0.8750 in |
| Shaft length input | 1.1700 in, 29.718 mm |
| Suitable for washdown | No |
| Thermal horsepower rating | 1.7300 hp, 1.29 kW |
23S40H